Perel E300W-F, E300W-G User Manual

Page 1
E300W-F/E300W-G
SMART WIFI SOCKET
2
USER MANUAL
Page 2
E300W-F/E300W-G
USER MANUAL
1. Introduction
To all residents of the European Union Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized company for recycling. This device should be returned to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities. Thank you for choosing Perel! Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
This device can be used by children aged from 8 years and above, and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the device in a safe way and understand the hazards involved. Children shall not play with the device. Cleaning and user maintenance shall not be made by children without supervision.
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare parts.
Do not immerge the device in any liquid. Keep the main unit away from humidity, high heat and fire.
Protect from shocks and abuse.
Wireless systems can suffer from interference from phones, microwave ovens and other wireless devices operating in the 2.4 GHz range. Therefore, keep this device at least 3 m away from such devices during installation and operation.
Do not overload the device.
3. General Guidelines
Refer to the Velleman® Service and Quality Warranty on www.velleman.eu.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and the dealer will not accept responsibility for any ensuing defects or problems.
Keep this manual for future reference.
Page 3
E300W-F/E300W-G
4. Operation
● Insert the device into a mains socket. ● Download the [WiFi Socket] app in Apple® App Store or Google® Play, and install on your smartphone. De-activate the filter or firewall prior to installing.
Tap the [WiFi Socket] icon.
Sign up with a valid e-mail address and
password.
Page 4
E300W-F/E300W-G
Click here to save all data.
You can fill in your e-mail address and
password in this area.
Click here to show/hide the password.
Click [OK] to complete the registration.
You will return to the login screen.
Page 5
E300W-F/E300W-G
4.1 Adding a Smart Socket
To add a smart socket, tap the [+]
button.
Make sure your smartphone is connected
to the network. Enter the password.
Switch on the smart socket by holding
the on-off button pressed. Tap the
[Start] button on your smartphone. The
smart socket will now connect to your
network.
Page 6
E300W-F/E300W-G
4.2 Operating the Smart Socket
Activate the connected smart socket by
tapping the [on-off] symbol in the app.
Connected smart socket activated.
Tap here to enter the setting page.
Page 7
E300W-F/E300W-G
4.3 Lock Setting
Hold pressed to delete the connected
smart phone.
Tap here to lock/unlock the smart
socket.
Page 8
E300W-F/E300W-G
4.4 Assigning an Icon
Tap here to edit the icon, name, etc. of
the smart socket.
Save the modifications.
Assign an icon and name your smart
socket.
Tap [+] to add an icon.
Page 9
E300W-F/E300W-G
4.5 Timer, Countdown, Absence
Timer
Select your option: [Timer].
Tap [+] to enter the time setting page.
Tap here to save your settings.
Set the switch-off time.
Page 10
E300W-F/E300W-G
Set the switch-on time.
Tap here to save your settings.
The timer is set. The smart socket will
switch off at 17:05 and switch on at
17:07).
Page 11
E300W-F/E300W-G
Countdown
Hold pressed to delete the timer setting.
Select your option: [Countdown].
Tap [+] to enter the countdown setting
page.
Page 12
E300W-F/E300W-G
Absence
Tap here to save your settings.
Set your countdown and activate the
function.
Select your option: [Absence].
Tap [+] to enter the absence setting
page.
Page 13
E300W-F/E300W-G
Set he start time, start date, end time
and end date.
Tap here to return to the device list.
The absence function can be set to one
group only.
Page 14
E300W-F/E300W-G
4.7 RF Device Setting
Adding a New RF Device
Tap here to enter the [RF Devices] page.
Next, tap [+] to add an RF device.
Tap here to return to the menu.
Page 15
E300W-F/E300W-G
Select the RF device type.
Tap here to save your settings.
Enter the device name.
Select the icon for your RF device.
Specify the receiver socket.
Page 16
E300W-F/E300W-G
Pairing an RF Device
The RF device has been successfully
added.
Now, pair your RF device.
Tap here to enter the [RF Devices]
settings page.
Page 17
E300W-F/E300W-G
Operation
After pairing, tap [ON] or [OFF] to switch
the device on or off.
In learning mode, pair the RF device by
tapping [LEARN].
Tap [EDIT] to enter the configuration
page.
Use these options to control the RF
device (appearance according to
function).
ON/OFF: RF device as switch or dimmer.
UP/DOWN: RF device as curtain.
HIGH/LOW: RF device as thermostat.
Page 18
E300W-F/E300W-G
The RF Device as a Timer
Tap here to enter the timer setting page.
Tap here to save the settings.
The timer will activate from at 17:07
Monday to Sunday.
Page 19
E300W-F/E300W-G
4.8 RF Device Setting
The timer function is ready.
Tap [CHANGE PASSWORD] to check your
password.
Page 20
E300W-F/E300W-G
4.9 Logging Out
Tap here to save your new password.
To change your password: first, enter
the old password, then enter the new
password and confirm.
Tap [LOG OUT] to log out.
Also, log out first if you want to log in
under a new ID.
Page 21
E300W-F/E300W-G
Tap [OK] to return to the login page.
Tap [CANCEL] to cancel the action.
Page 22
E300W-F/E300W-G
5. Cleaning and Maintenance
Disconnect from the mains before cleaning. Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals,
cleaning solvents or strong detergents.
6. Technical Specifications
transmission range ................................................................................................ WiFi
network ................................................................... 2.412-2.484 GHz IEEE802.11 b/g/n
power supply ......................................................................................... 230 V~, 50 Hz
max. power ............................................................................................. 3680 W, 16 A
ambient temperature................................................................................... max. 35 °C
Use this device with original accessories only. Velleman nv cannot be held responsible in the event of damage or injury resulting from (incorrect) use of this device. For more info concerning this product and the latest version of this manual, please visit our website www.perel.eu. The information in this manual is subject to change without prior notice.
RED Declaration of Conformity Hereby, Velleman NV declares that the radio equipment type [E300W-F] / [E300W-G] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.velleman.eu.
All product and company names are (registered) trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them.
© COPYRIGHT NOTICE The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the prior written consent of the copyright holder.
Page 23
Velleman® Service and Quality Warranty
Since its foundation in 1972, Velleman® acquired extensive experience in the electronics world and currently distributes its products in over 85 countries. All our products fulfil strict quality requirements and legal stipulations in the EU. In order to ensure the quality, our products regularly go through an extra quality check, both by an internal quality department and by specialized external organisations. If, all precautionary measures notwithstanding, problems should occur, please make appeal to our warranty (see guarantee conditions).
General Warranty Conditions Concerning Consumer Products (for EU):
• All consumer products are subject to a 24-month warranty on production flaws and defective material as from the original date of purchase.
• Velleman® can decide to replace an article with an equivalent
article, or to refund the retail value totally or partially when the complaint is valid and a free repair or replacement of the article is impossible, or if the expenses are out of proportion. You will be delivered a replacing article or a refund at the value of 100% of the purchase price in case of a flaw occurred in the first year after the date of purchase and delivery, or a replacing article at 50% of the purchase price or a refund at the value of 50% of the retail value in case of a flaw occurred in the second year after the date of purchase and delivery.
• Not covered by warranty:
- all direct or indirect damage caused after delivery to the article (e.g. by oxidation, shocks, falls, dust, dirt, humidity...), and by the article, as well as its contents (e.g. data loss), compensation for loss of profits;
- consumable goods, parts or accessories that are subject to an aging process during normal use, such as batteries (rechargeable, non­rechargeable, built-in or replaceable), lamps, rubber parts, drive belts... (unlimited list);
- flaws resulting from fire, water damage, lightning, accident, natural disaster, etc.…;
- flaws caused deliberately, negligently or resulting from improper handling, negligent maintenance, abusive use or use contrary to the
manufacturer’s instructions;
- damage caused by a commercial, professional or collective use of the article (the warranty validity will be reduced to six (6) months when the article is used professionally);
- damage resulting from an inappropriate packing and shipping of the article;
- all damage caused by modification, repair or alteration performed by a third party without written permission by Velleman®.
• Articles to be repaired must be delivered to your Velleman® dealer,
solidly packed (preferably in the original packaging), and be completed with the original receipt of purchase and a clear flaw description.
• Hint: In order to save on cost and time, please reread the manual and check if the flaw is caused by obvious causes prior to presenting the article for repair. Note that returning a non-defective article can also involve handling costs.
• Repairs occurring after warranty expiration are subject to shipping costs.
• The above conditions are without prejudice to all commercial
warranties.
The above enumeration is subject to modification according to
the article (see article’s manual).
Page 24
Made in PRC
Imported for PEREL by Velleman nv
Legen Heirweg 33, 9890 Gavere, Belgium
www.perel.eu
Loading...