LAURASTAR
User manual for Laurastar upgraded
equipment.
SERVICE CODE: LUK_A-A1
ENG
FOR THE UPGRADED MODELS
S4/S5/S6/S7/X1/X2
First system usage
Switching on
2a
2b
2c
Be sure to carefully read user manual
of your model of the Laurastar equipment,
main usage features like (filling with water,
installation, cleaning, and safety
precautions etc) are not reflected in the
current manual.
It is very important to strictly follow all
advices and operate features of the
ironing system according to the
instructions, which could be found in the
user manual provided by equipment
manufacturer.
Plug the system into an electricity outlet.
Turn on the system, by switching it to the
“ON” position.
Push any button on the iron, or take it out
of the table. When heating starts, short
beep sound is heard.
1
2
Iron stops and resume work automatically
3a
3b
When system is idle for more than
15 minutes, it turns off automatically.
There is an alarm in the system, which
produces alarm beep once a minute while
in idle.
In order to restart heating of an ironing
system, all you need is to push any button,
or raise the iron of the table, when heating
starts short alarm beep is heard.
Ironing
4a
4b
4c
In order to produce steam while ironing,
use the button “Manual Steam Delivery”.
Change the fan directions Fan/Vacuum
with the short term, (no more than 3 sec),
“Fan” button push.
Change the steam delivery mode pulsing/
continuous with the long (more than
3 sec.) pushing and holding of the “Fan”
button, switching between the modes
is accompanied with the short beep sound.
3
4
4d
4e
4f
Change the steam pulsing velocity, and fan
off delay, in a programming mode,
by pushing “Fan” + “Manual Steam
Delivery” buttons for more than 3 seconds.
Switching between modes programming and
usage is accompanied by 3 beeps of an
alarm.
Change the velocity of steam delivery
by pressing between 1-2-3 portions
of steam per second. Press and hold
“Manual Steam Delivery” button. Switching
between modes is accompanied by short
alarm beeps, consequently to the modes
by one, two or three beeps.
Adjust the fan off delay 0/30 seconds
by short pressing the fan option (no more
than 3 sec), switching between modes
is accompanied by one or two short
alarms, which correspond to the modes.
Turning off the ironing system
5a
Turn off the main system switcher.
5
Version 1.0.
© 2014 LTD “Perao”
Rustavelli str, bld. 3, ap.7
Moscow, Russia, 127254
Phone: +7 (495) 544-16-85
www.perao.ru
info@perao.ru
5b
Unplug the system from outlet.
Loading...