Pepperl Fuchs VDM35-6-L/20/105/122 Data Sheet
Distance sensor
VDM35-6-L/20/105/122
Dimensions
24 52
Model Number
VDM35-6-L/20/105/122
Distance sensor
with 5-pin, M12 x 1 connector
Features
• Can be aligned using an integrated pilot laser
• Adjustable switch outputs
• Not sensitive to ambient light
•Analog output 4mA...20mA
42
Electrical connection
Option:
1
2
3
4
5
+UB
QB
0 V
QA
Analogue
M5 x 8
20
ø 5.8
95
42 43
42
12.3
93
81.5
M12 x 1
5.75
Pinout
1
5
2
4
3
Indicators/operating means
3
3
2
2
1
1
6 7
6 7
Q
A
S
1
inv.
S
2
S
PWR SLOW
0 % analog
inv.
100 % analog
TT
ESC
Q
B
S
1
S
2
4
4
5
5
1 LED Menue red
2 LED QA yellow
3 LED Fast orange
4 LED Power green
5 LED QB yellow
6 Button Set
7 Button Toggle
Release date: 2016-05-24 12:20 Date of issue: 2016-05-24 186464_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Distance sensor
VDM35-6-L/20/105/122
Technical data
General specifications
Measurement range 0.2 ... 6 m
Reference target Kodak white (90%)
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE
Laser class Measurement laser: 1
Wave length Measurement laser: 905 nm
Beam divergence Measurement laser: 2 mrad Alignment laser: 1 mrad
Pulse length Measurement laser: 6 ns Alignment laser: 0.25 µs
Repetition rate Measurement laser : 40 kHz Alignment laser: 1 kHz
Maximum optical power output Measurement laser: 1.8 W Alignment laser: 3 mW
Measuring method Time of flight measurement
Diameter of the light spot 4 mm x 12 mm at a distance of 6 m
Ambient light limit 5000 Lux
Temperature influence typ. ≤ 1.2 mm/K
Indicators/operating means
Operation indicator LED green
Function indicator LED yellow: switching state (2x) , LED orange : Operating mode
Control elements Control panel : Adjuster for switch point , Operating mode , Ana-
Parameterization indicator LED red (4x)
Electrical specifications
Operating voltage UB18 ... 30 V DC , class 2
Ripple 10 % within the supply tolerance
No-load supply current I
Time delay before availability t
Output
Switching type light/dark on, switchable
Signal output 2 PNP, short-circuit protected
Switching current max. 100 mA
Measurement output 1 analog output 4 ... 20 mA, short-circuit/overload protected ,
Vol tage dro p U
Deviation of the characteristic curve typ. ≤ ± 40 mm
Switching frequency f Fast: 40 Hz / Slow: 16 Hz
Response time Fast: 13 ms / Slow: 80 ms
Repeat accuracy R Fast: ≤ ± 15 mm / Slow: ≤ ± 10 mm
Ambient conditions
Ambient temperature -20 ... 50 °C (-4 ... 122 °F)
Storage temperature -40 ... 80 °C (-40 ... 176 °F)
Mechanical specifications
Degree of protection IP67
Connection 5-pin, M12 x 1 connector
Material
Housing ABS
Optical face PMMA
Mass 200 g
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 60947-5-2
Standard conformity
Laser class IEC 60825-1:2007
modulated infrared light
INTO BEAM
Alignment laser: 2
Alignment laser: 650 nm
log output ( S - Set , T - Toggle )
≤ 125 mA / 24 V DC
0
≤ 300 ms
v
Rmax = 500 Ohm
≤ 2.4 V
d
Laserlabel
VISIBLE AND INVISIBLE LASER RADIATION
DO NOT STARE INTO BEAM
Measuring LASER class 1
wavelength: 905nm
peak power: 2,4W
pulse duration: 8,75ns
deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
LASER PRODUCT
IEC 60825-1: 2007 certified
Complies with 21 CFR 1040.10 and 1040.11except for
Pilot LASER class 2
wavelength: 650nm
peak power: 3,8mW
pulse duration: 0,25µs
Accessories
OMH-VDM35
Mounting bracket
OMH-VDM35-01
Adjustment set series VDM35
VDM35-AR
Alignment aid for VDM35 and VDM70 series
Other suitable accessories can be found at
Approvals and certificates
Approvals CE, cULus
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2016-05-24 12:20 Date of issue: 2016-05-24 186464_eng.xml
Loading...