Pepperl Fuchs VDM18-300/32/105/122 Data Sheet
Distance sensor
VDM18-300/32/105/122
Dimensions
Model Number
VDM18-300/32/105/122
Distance sensor
with 5-pin, M12 x 1 connector
Features
•Analog output 4mA...20mA
• High resolution
• Very fast response characteristic, suitable for rapid scanning process
50
4.3
4
Electrical connection
1
2
3
4
+UB
Analog
0 V
Q
50
40
44
4.3
M12 x 1
4
46
44
16
13.5
4
17
Version X (mm)
VDM18-100 18.4
VDM18-300 21.5
Receiver
X11
Emitter
5
IN
Pinout
1
24
5
3
Release date: 2016-07-08 11:33 Date of issue: 2016-07-08 193922_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Distance sensor
VDM18-300/32/105/122
Technical data
General specifications
Measurement range 80 ... 300 mm
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 2
Wave length 650 nm
Light spot representation approx. 2 mm x 4.5 mm at 300 mm
Measuring method Laser triangulation
Linearity error 0.25 % of the measuring range
Ambient light limit ≤ 5000 Lux
Resolution < 0.1 % of the measuring range
Temperature influence < 0.02% /°C
Indicators/operating means
Operation indicator LED green
Function indicator 2 yellow LEDs: Switching status (each output) , 4 green LEDs:
Control elements Control panel : Adjuster for switch point , Operating mode , Ana-
Parameterization indicator LED red
Electrical specifications
Operating voltage UB18 ... 30 V DC
No-load supply current I
Protection class II , rated voltage ≤ 50 V DC
Time delay before availability t
Input
Control input Laser off (HIGH +UB) Keypad lock (LOW 0 V)
Output
Signal output 1 PNP output, short-circuit protected, reverse polarity protected,
Switching current max. 100 mA
Measurement output 1 analog output 4 ... 20 mA, short-circuit/overload protected ,
Switching frequency f ≤ 1 kHz
Response time 0.4 ms
Ambient conditions
Ambient temperature -10 ... 60 °C (14 ... 140 °F)
Storage temperature -20 ... 80 °C (-4 ... 176 °F)
Mechanical specifications
Degree of protection IP67
Connection 5-pin, M12 x 1 plastic connector
Material
Housing ABS , impact resistant
Optical face PMMA
Mass approx. 43 g
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 60947-5-2
Standard conformity
Laser class DIN EN 60825-1:2008, IEC 60825-1:2007
typ. service life 50,000 h at Ta = +40 °C
Operating mode
log output ( S - Set , T - Toggle )
≤ 40 mA at 24 V DC
0
≤ 300 ms
v
open collector
Rmax = 500 Ohm
Laserlabel
Accessories
OMH-VDM18-01
Mounting accessory, distance measuring
devices Series VDM18
OMH-VDM18-02
Mounting accessory, distance measuring
devices Series VDM18
Other suitable accessories can be found at
Approvals and certificates
UL approval cULus Listed
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2016-07-08 11:33 Date of issue: 2016-07-08 193922_eng.xml
Loading...