Pepperl Fuchs VB14N-600-R Data Sheet
Barcode scanner VB14N-600-R
Technical Data
General specifications
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 2
Wave length 650 nm
Beam divergence < 1.5 mrad
Pulse length 1.5 ms
Repetition rate 200 Hz
Model Number
VB14N-600-R
Barcode scanner
Features
• Grid scanner
• Simple operation via function keys:
test mode, code teaching and code
optimization
• Code reconstructor
• Connect up to 32 scanners
• Sturdy aluminum housing
• Two serial interfaces RS 232 / RS 485
• Engine control (On/Off) possible
• Degree of protection IP65
Function
The VB14N-600-R is a grid scanner for 1D
barcodes. With its high-performance optics
and code reconstruction, the scanner offers
a high level of reliability in reading difficult-todetect 1D barcodes.
A function key and several LEDs on the barcode scanner provide support when parameterizing, teaching in barcodes, and testing. In
live operation, the LEDs provide information
about the relevant read status.
You can establish a high-speed connection
between up to 32 devices. This connection
enables data to be recorded in a quicker and
more efficient manner, without the need for
an additional external multiplexer.
The corresponding PC software makes
parameterization simple.
max. pulse energy 3.26 µJ
Scan rate 600 ... 1000 s
Read distance 190 ... 600 mm
Angle of divergence 50 °
Optical face front or on side (with deviation mirror)
Resolution 0.35 mm ( 14 mils )
Indicators/operating means
Operation indicator LED blue: Power on, LED green: Ready to read (READY), LED
Electrical specifications
Operating voltage UB10 ... 30 V DC
Power consumption P
Interface
Interface type serial , RS-232 and RS-485 up to 115.2 kBit/s
Input 1
Input type External triggering
Output
Signal output 2, programmable, optocoupled
Switching voltage max. 40 V DC
Switching current max. 40 mA
Voltage drop Ud1 V at load current ≤ 10 mA
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 70 °C (-4 ... 158 °F)
Relative humidity 90 % , noncondensing
Shock resistance IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis
Vibration resistance IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis
Mechanical specifications
Degree of protection IP65
Connection 1 m cable with 25-pin Sub-D connector
Material
Housing aluminum
Mass 330 g
Compliance with standards and directives
Directive conformity EMC Directive 2004/108/EC
Standard conformity
Noise immunity EN 61000-6-2:2005
Emitted interference EN 55022
Degree of protection EN 60529
Laser class IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11
green: Read successfully (GOOD), LED yellow: External trigger
signal pending (TRIGGER), LED yellow: Communication active
(COM), LED red: "no read" (STATUS)
max. 5 W
0
ID-NET™ up to 1 Mbit/s
except for deviations pursuant to Laser Notice No. 50, dated
June 24, 2007
-1
Release Date: 2014-09-26 12:52 Date of issue: 2014-09-26 206848_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
VB14N-600-RBarcode scanner
Dimensions
23.3
14
46
68
Electrical connection
Accessories
CBX100
Connector box for barcode scanner
OM-VB14N
84
4
10
40
auto setup
auto learn
test mode
exit
mode
READY
GOOD
TRIGGER
STATUS
COM
10
40
33
14.7
M4
oscillating mirror for the VB14N barcode
scanner series
DM-VB14N-90
Deviation mirror for barcode scanner series VB14
DM-VB14N-102
Deviation mirror for barcode scanner series VB14
CBX500-KIT-B6
CBX500-KIT-B17
CBX500-KIT-B19-IP54
CBX500-KIT-B19-IP65
Other suitable accessories can be found at
25-pin D-sub connector pinout
1
14
13
25
Pin Name Function
9, 13 +UB Power supply input voltage +
25 GND Power supply input voltage 1 GND Chassis Cable shield connected to chassis
18 IN TRG + (A) External Trigger A +
19 IN TRG - (B) External Trigger B 6 IN 2 + (A) Input 2 A +
10 IN 2 - (B) Input 2 B 8 OUT 1 + Output 1 +
22 OUT 1 - Output 1 11 OUT 2 + Output 2 +
12 OUT 2 - Output 2 20 RX RS232 Auxiliary RS232
21 TX RS232 Auxiliary RS232
23 ID + High speed internal network ID-NET +
24 ID - High speed internal network ID-NET 14, 15, 16, 17 NC Not connected
Pin RS232 RS485 RS485
full-duplex half-duplex
2 TX TX + RTX +
3 Main RX RX +
4 interface RTS TX - RTX 5 signals CTS RX 7 SGND SGND SGND
Release Date: 2014-09-26 12:52 Date of issue: 2014-09-26 206848_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...