Pepperl Fuchs VB14N-600 Data Sheet

Barcode scanner VB14N-600
Technical Data
General specifications
Light source laser diode Light type modulated visible red light Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM Laser class 2 Wave length 650 nm Beam divergence < 1.5 mrad Pulse length 1.5 ms Repetition rate 200 Hz
Model Number
VB14N-600
Barcode scanner
Features
• Simple operation via function keys: test mode, code teaching and code optimization
• Code reconstructor
• Connect up to 32 scanners
• Sturdy aluminum housing
• Two serial interfaces RS 232 / RS 485
• Engine control (On/Off) possible
• Degree of protection IP65
Function
The VB14N-600 is a line scanner for 1D bar­codes. With its high-performance optics and code reconstruction, the scanner offers a high level of reliability in reading difficult-to­detect 1D barcodes. A function key and several LEDs on the bar­code scanner provide support when parame­terizing, teaching in barcodes, and testing. In live operation, the LEDs provide information about the relevant read status. You can establish a high-speed connection between up to 32 devices. This connection enables data to be recorded in a quicker and more efficient manner, without the need for an additional external multiplexer. The corresponding PC software makes parameterization simple.
max. pulse energy 3.26 µJ Scan rate 600 ... 1000 s Read distance 190 ... 600 mm Angle of divergence 50 ° Optical face front or on side (with deviation mirror) Resolution 0.35 mm ( 14 mils )
Indicators/operating means
Operation indicator LED blue: Power on, LED green: Ready to read (READY), LED
Electrical specifications
Operating voltage UB10 ... 30 V DC Power consumption P
Interface
Interface type serial , RS-232 and RS-485 up to 115.2 kBit/s
Input 1
Input type External triggering
Output
Signal output 2, programmable, optocoupled Switching voltage max. 40 V DC Switching current max. 40 mA Voltage drop Ud1 V at load current 10 mA
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F) Storage temperature -20 ... 70 °C (-4 ... 158 °F) Relative humidity 90 % , noncondensing Shock resistance IEC 68-2-27 Test EA 30G; 11 ms; 3 impacts on each axis Vibration resistance IEC 68-2-6 Test FC 1.5 mm ; 10 ... 55 Hz ; 2 hours on each axis
Mechanical specifications
Degree of protection IP65 Connection 1 m cable with 25-pin Sub-D connector Material
Housing aluminum Mass 330 g
Compliance with standards and direc­tives
Directive conformity EMC Directive 2004/108/EC Standard conformity
Noise immunity EN 61000-6-2:2005
Emitted interference EN 55022
Degree of protection EN 60529
Laser class IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11
green: Read successfully (GOOD), LED yellow: External trigger signal pending (TRIGGER), LED yellow: Communication active (COM), LED red: "no read" (STATUS)
max. 5 W
0
ID-NET™ up to 1 Mbit/s
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
-1
Release Date: 2014-09-26 12:51 Date of issue: 2014-09-26 206847_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
VB14N-600Barcode scanner
Dimensions
23.3
14
46
68
Electrical connection
Accessories
CBX100
Connector box for barcode scanner
OM-VB14N
84
4
10
40
auto setup
auto learn
test mode
exit
mode
READY
GOOD
TRIGGER
STATUS
COM
10
40
33
14.7 M4
oscillating mirror for the VB14N barcode scanner series
DM-VB14N-90
Deviation mirror for barcode scanner se­ries VB14
DM-VB14N-102
Deviation mirror for barcode scanner se­ries VB14
CBX500-KIT-B6
CBX500-KIT-B17
CBX500-KIT-B19-IP54
CBX500-KIT-B19-IP65
Other suitable accessories can be found at
25-pin D-sub connector pinout
1
14
13
25
Pin Name Function
9, 13 +UB Power supply input voltage + 25 GND Power supply input voltage ­1 GND Chassis Cable shield connected to chassis 18 IN TRG + (A) External Trigger A + 19 IN TRG - (B) External Trigger B ­6 IN 2 + (A) Input 2 A + 10 IN 2 - (B) Input 2 B ­8 OUT 1 + Output 1 + 22 OUT 1 - Output 1 ­11 OUT 2 + Output 2 + 12 OUT 2 - Output 2 ­20 RX RS232 Auxiliary RS232 21 TX RS232 Auxiliary RS232 23 ID + High speed internal network ID-NET + 24 ID - High speed internal network ID-NET ­14, 15, 16, 17 NC Not connected
Pin RS232 RS485 RS485 full-duplex half-duplex
2 TX TX + RTX +
3 Main RX RX + 4 interface RTS TX - RTX ­5 signals CTS RX ­7 SGND SGND SGND
Release Date: 2014-09-26 12:51 Date of issue: 2014-09-26 206847_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...
+ 1 hidden pages