Pepperl Fuchs VAA-2E-F85A-S-V1 Data Sheet
AS-Interface EMERGENCY STOP button VAA-2E-F85A-S-V1
Dimensions
M4 T
apping Screw Holes
for
Rear Mounting
(Depth: 10 mm)
76
(4x)
Front Mounting Holes (2x)
ø 14
Knockout
21
41
21
SAFETY AT WORK
Model number
VAA-2E-F85A-S-V1
AS-Interface EMERGENCY STOP button
Features
• 2-channel, compelled connected
• Outwit-proof according to
ISO 13850/EN 418
• TÜV-approval for system components
is available
• Biased actuator for self-monitoring
• EMERGENCY STOP unlocking by
turning or pulling
• M12 plug connection
Function
This AS-Interface emergency shutoff button
is a two-channel, positively driven contact,
allowing the operation of personnel protection
systems when used according to specification along with an AS-Interface safety monitor. It occupies one complete address in the
AS-Interface strand.
When the safety monitor is properly configured, up to EN 954-1 Category 4 and IEC
61508 SIL 3 can be achieved.
For mounting, the housing of this AS-Interface emergency shutoff button can be screwed directly onto the machine.
Accessories
VAZ-F85A-SH
Actuating protection for emergency off
button
VAZ-F85A-MH
Mounting aid for EMERGENCY STOP
button
Release date: 2018-01-24 15:47 Date of issue: 2018-01-24 192436_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
76
59.5 *
* without nameplate: 32
with nameplate: 33.5
15.5
62
Electrical connection
AS-Interface +
1
2
AS-Interface -
4
3
Technical data
General specifications
Slave type Safety-Slave
AS-Interface specification V2.1
Required master specification ≥ V2.0
UL File Number E198304
Functional safety related parameters
MTTFd 200 a
B
1 E+5
10d
Electrical specifications
Rated operating voltage Ue26.5 ... 31.6 V from AS-Interface
Rated operating current I
Protection class III
Insulation resistance ≥ 100 MΩ
Input
Number/Type 2 NC
Supply from AS-Interface
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EU EN 62026-2:2013
Stand ar d co nf or mit y
Electromagnetic compatibility EN 62026-2:2013
Degree of protection EN 60529:2000
Electrical safety EN 60947-5-5:1997+A1:2005
AS-Interface EN 62026-2:2013
Functional safety EN 62061:2005
Programming instructions
Profile S-0.B.E
IO code 0
ID code B
ID1 code F
ID2 code E
Data bits (function via AS-Interface) input output
D0 dyn. safety code 1 -
≤ 25 mA
e
Safety function by positive opening
in accordance with IEC/EN 60947-5-1
Reset by pulling
EN 61508 Parts 1-7:2010
NFPA 79:2007
EN 60204-1:2006
ø 4.6
1
D1 dyn. safety code 1 D2 dyn. safety code 2 D3 dyn. safety code 2 -
Parameter bits (programmable via AS-i) function
P0 not used
P1 not used
P2 not used
P3 not used
Ambient conditions
Ambient temperature -25 ... 55 °C (-13 ... 131 °F) (no freezing)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Relative humidity 40 ... 85 % , noncondensing
Mechanical specifications
Operating force Push: 32 N
Operating distance for positive opening operation: min. 4 mm
Degree of protection IP65
Connection M12 round connector
Material
Housing PC
Mass 195 g
Life span > 250,000 switching operations
Pull: 21 N
Turn: 0.27 Nm
Minimum for positive opening operation: 60 Nm
maximal: 4.5 mm
Module: IP20
VAA-2E-F85A-S-V1AS-Interface EMERGENCY STOP button
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2018-01-24 15:47 Date of issue: 2018-01-24 192436_eng.xml
Loading...