Pepperl Fuchs V15-G-BK0.3M-PUR-O1-DT6PG Data Sheet
Retroreflective sensor with polarization filter
Dimensions
ML7-55/59/82b/103/115
Model Number
ML7-55/59/82b/103/115
Retroreflective sensor
with 2 m fixed cable
Features
• Reliable sensor for standard applications
• Miniature design with versatile mounting options
• Automatic adjustment of sensitivity
via TEACH-IN
• Resistant against noise: reliable operation under all conditions
• Clear and functional display concept
for the operating modes
• Certified by ECOLAB
Product information
Small, robust, effective, and reliable - these
are the properties of the ML7 sensor series.
Due to their small size, number of versions,
and two different lens positions, they are particularly suited for installation in tight spaces.
The robust design and high quality of Pepperl+Fuchs mean they can also be used
under harsh environmental conditions. The
efficient technology, switching frequencies up
to 1000 Hz, high resistance to ambient light,
and 4-in-1 output make the series suitable for
non-contact object detection.
31
2
7.6
Electrical connection
Option:
BN
WH
BU
BK
= Light on
= Dark on
+UB
Q
0 V
Q
82b/103
Alarm
Indicators/operating means
1
2
3
4
ø3.2
14 3
23
14.2
13.5
103
11
2
5
7.5
1 Operating display green
2 Signal display yellow
3 TEACH-IN button
4 Emitter
5 Receiver
Release date: 2013-04-18 15:09 Date of issue: 2013-05-13 127449_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Retroreflective sensor with polarization filter
ML7-55/59/82b/103/115
Technical data
General specifications
Effective detection range 0 ... 3 m
Reflector distance 0.03 ... 3 m
Threshold detection range 3.5 m
Reference target H85-2 reflector
Light source LED
Light type modulated visible red light
Diameter of the light spot approx. 180 mm at a distance of 3.5 m
Angle of divergence approx. 3 °
Ambient light limit 40000 Lux
Functional safety related parameters
MTTFd 1530 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operating display LED green, flashes in case of short-circuit
Function display LED yellow, lights up when light beam is free, flashes when fal-
Controls TEACH-IN key
Electrical specifications
Operating voltage UB10 ... 30 V DC , class 2
Ripple max. 10 %
No-load supply current I
Output
Pre-fault indication output 1 PNP, inactive when level falls below function reserve after
Switching type dark on
Signal output 1 PNP output, short-circuit protected, reverse polarity protected,
Switching voltage max. 30 V DC
Switching current max. 100 mA
Vol ta ge dro p U
Switching frequency f 1000 Hz
Response time 0.5 ms
Ambient conditions
Ambient temperature -20 ... 60 °C (-4 ... 140 °F)
Storage temperature -40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Protection degree IP67 / IP69K
Connection 2 m fixed cable
Material
Housing PC (glass-fiber-reinforced Makrolon)
Optical face PMMA
Mass approx. 50 g
Compliance with standards and directives
Standard conformity
Product standard EN 60947-5-2:2007
Sta nda rd s EN 50178, UL 508
) 20 a
M
0
d
ling short of the stability control
< 20 mA
approx. 5 s.
Immediately inactive if the beam is interrupted 4 times during the
flashtime.
open collector
≤ 1.5 V DC
IEC 60947-5-2:2007
Accessories
Montagekit OMH-ML7-01
Mounting set consisting of bracket OMHML-01 sheet OMH-ML7-03, and fastening material
Montagekit OMH-ML7-02
Mounting set consisting of bracket OMHML-02 sheet OMH-ML7-03, and fastening material
OMH-ML7-01
Mounting bracket
OMH-ML7-02
Mounting bracket
OMH-ML7-03
Fixing plate
Suitable reflectors and cable sockets can be
found in the Internet
Approvals and certificates
Protection class II, rated voltage ≤ 250 VAC with pollution degree 1-2 accor-
ding to IEC 60664-1
UL approval cULus
CCC approval CCC approval / marking not required for products rated ≤36 V
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2013-04-18 15:09 Date of issue: 2013-05-13 127449_eng.xml
Loading...