Pepperl Fuchs UDC-30GM-085-3E3 Data Sheet
Double material sensor UDC-30GM-085-3E3
Technical data
General specifications
Sensing range 50 ... 150 mm , optimal distance: 80 mm
Transducer frequency 85 kHz
Indicators/operating means
LED green Display: single-layer material detected
LED yellow Display: no material (air)
LED red Display: 2-layer or multi-layer material detected
Electrical specifications
Model Number
UDC-30GM-085-3E3
Features
• Ultrasonic system for reliable
detection of no, one, or two
overlapping sheet materials
• No TEACH-IN required
• Insensitive to printing, colors, and
shining surfaces
• Programmable
Operating voltage U
No-load supply current I
Time delay before availability t
Input
Input type Function input
Pulse length ≥ 100 ms
Function in normal operation mode, the function input has to be
Impedance ≥ 4 kΩ
Output
Output type 3 switch outputs PNP, NC
Rated operating current I
Voltage drop U
Switch-on delay t
Switch-off delay t
Pulse extension min. 120 ms programmable
Ambient conditions
Ambient temperature 0 ... 50 °C (32 ... 122 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Connection type cable PVC , 2 m
Core cross-section 0.14 mm
Degree of protection IP65
Material
Housing nickel plated brass; plastic components: PBT
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 300 g
General information
Supplementary information Switch settings of the external programming adapter:
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007+A1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source
CSA approval cCSAus Listed, General Purpose, Class 2 Power Source
CCC approval CCC approval / marking not required for products rated ≤36 V
B
0
v
e
d
on
off
18 ... 30 V DC , ripple 10 %
< 200 mA
< 500 ms
0-level: -U
1-level: +U
connected with UB+ or UB-
3 x 100 mA , short-circuit/overload protected
≤ 3 V
approx. 30 ms
approx. 30 ms
"output load": pull-down
"output logic": inv
IEC 60947-5-2:2007 + A1:2012
... -UB + 1V
B
- 1 V ... +U
B
2
SS
B
Release date: 2017-09-25 08:45 Date of issue: 2017-09-25 193141_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Double material sensor UDC-30GM-085-3E3
Dimensions
wires 70 mm with
wire end ferrules
l = 2 m
l = 0.5 m
LEDs
ø 15
70
Evaluation unit with
receiver unit
5
36
22 25
88
36
0.5 m
5
52
ø 40
Emitter unit
25
Additional Information
Mounting/Adjustment
Recommended distances
a = 20 ... 30 mm
b ≥ 75 mm
d = 50 ... 150 mm
β = 20 ... 30°
Angular misalignment
ø 40
< +/- 1°
α
Sensor offset
s < +/- 1 mm
b
β
d
a
α
s
Electrical Connection
Standard symbol/Connection:
Double sheet control
(BN)
(PK)
(WH)
(BK)
U
(GY)
(BU)
Accessories
UC-PROG1-USB
Programming adapter
MH-UDB02
Mounting bracket for double sheet metal monitor
UDB-Cable-2M
+U
B
Function input
Output single sheet
Output double sheet
Output air
-U
B
UDB-Cable-1M
V15S-G-0,3M-PUR-WAGO
Male cordset, M12, 5-pin, PUR cable with WAGO terminals
Ultraschall-Sensoren DTM
DTM devices for communication with cube style and UMC... sensors
PACTware 4.1
FDT Framework
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2017-09-25 08:45 Date of issue: 2017-09-25 193141_eng.xml
Loading...