Pepperl Fuchs UC6000-30GM-IUR2-V15 Data Sheet

Ultrasonic sensor UC6000-30GM-IUR2-V15
Technical data
General specifications
Sensing range 350 ... 6000 mm Adjustment range 400 ... 6000 mm Dead band 0 ... 350 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 65 kHz
Model Number
UC6000-30GM-IUR2-V15
Single head system
Features
• Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
• Analog current and voltage output
• Synchronization options
• Adjustable acoustic power and sensitivity
• Temperature compensation
Diagrams
Characteristic response curve
Distance Y [m]
1.5
1.0
0.5
0.0
-0.5
-1.0
-1.5
0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0
Curve 1: flat surface 100 mm x 100 mm Curve 2: round bar, Ø 25 mm
2
Y
X
1
Distance X [m]
Response delay 285 ms minimum
Indicators/operating means
LED green solid: Power-on
LED yellow 1 solid: object in evaluation range
LED yellow 2 solid: object in detection range
LED red solid: temperature/program plug not connected
Temperature/TEACH-IN connector Temperature compensation , Evaluation range programming
Electrical specifications
Operating voltage U Power consumption P Time delay before availability t
Interface
Interface type RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Input/Output
Synchronization bi-directional
Synchronization frequency
Common mode operation 7 Hz Multiplex operation 7 Hz / n , n = number of sensors , n 5
Output
Output type 1 current output 4 ... 20 mA
Resolution evaluation range [mm]/4000, but 0.35 mm Deviation of the characteristic curve 0.2 % of full-scale value Repeat accuracy 0.1 % of full-scale value Load impedance current output: 500 Ohm
Temperature influence 2 % from full-scale value (with temperature compensation)
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector plug M12 x 1 , 5-pin Degree of protection IP65 Material
Housing stainless steel (1.4305 / AISI 303)
Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam
Mass 280 g
Factory settings
Output evaluation limit A1: 800 mm
Compliance with standards and directives
Standard conformity
Standards EN 60947-5-2:2007+A1:2012
Approvals and certificates
UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated 36 V
B
0
v
850 ms factory setting
flashing: Standby mode or program function object detected
flashing: program function
flashing: program function
flashing: fault or program function object not detected
, output function setting
10 ... 30 V DC , ripple 10 %
900 mW 500 ms
0 level -U 1 level: +4 V...+U input impedance: > 12 KOhm synchronization pulse: 100 µs, synchronization interpulse period: 2 ms
1 voltage output 0 ... 10 V
voltage output: 1000 Ohm
0.2 %/K (without temperature compensation)
PBT plastic parts
evaluation limit A2: 6000 mm rising ramp
IEC 60947-5-2:2007 + A1:2012 EN 60947-5-7:2003 IEC 60947-5-7:2003
...+1 V
B
SS
B
Release date: 2018-01-08 10:27 Date of issue: 2018-01-09 104095_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Ultrasonic sensor UC6000-30GM-IUR2-V15
Dimensions
5
36
LED
temperature probe
coded plug
ø73
M30x1.5
27.5
Additional Information
Analogue output function
Analog function
19
32.5
Near distance
of evaluation
Rising slope
4 mA/0 V
Falling slope
20 mA/10 V
132
Zero line mode
4 mA/0 V
A1= 0 mm A2
22
Far distance of evaluation
20 mA/10 V
4 mA/0 V
20 mA/10 V
Electrical Connection
Standard symbol/Connection:
(version IU)
U
Core colors in accordance with EN 60947-5-2.
Pinout
Wire colors in accordance with EN 60947-5-2
1 BN 2 WH 3 BU 4 BK 5 GY
1
(BN)
(GY)
5
2
(WH)
(BK)
4
(BU)
3
2
1
+ U
B
Sync. 0-10 V 4-20 mA
- U
B
5
4
3
(brown) (white) (blue) (black) (gray)
Release date: 2018-01-08 10:27 Date of issue: 2018-01-09 104095_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...
+ 3 hidden pages