Pepperl Fuchs UC500-30GM-IU-V1 Data Sheet

Ultrasonic sensor UC500-30GM-IU-V1

Technical data

General specifications

Sensing range 60 ... 500 mm
Unusable area 0 ... 60 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 380 kHz
Response delay ≤ 35 ms

Indicators/operating means

Model Number

UC500-30GM-IU-V1

Single head system

Features

• Analog current and voltage output

• 12 bit D/A transducer

• Evaluation limits can be taught-in

• Temperature compensation

• Compact design

• Plug connection

Diagrams

LED yellow solid yellow: object in the evaluation range

LED red/green solid green: Power on

Temperature/TEACH-IN connector Temperature compensation , Evaluation range

Electrical specifications

Operating voltage U

Power consumption P

Output

B

0

Output type 1 current output 4 ... 20 mA

Resolution 0.172 mm
Deviation of the characteristic curve ≤ 0.2 % of full-scale value
Repeat accuracy ≤ 0.1 % of full-scale value
Load impedance current output: ≤ 500 Ohm

Temperature influence < 2 % of full-scale value (≤ 0.2 % / K without temperature

Standard conformity

Standards EN 60947-5-2

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type Connector M12 x 1 , 4-pin
Protection degree IP65
Material

Housing High grade stainless steel
Transducer epoxy resin/hollow glass sphere mixture; foam

Mass 175 g

yellow, flashing: program function evaluation limits, slope

green, flashing: program function, object detected
solid red: Connector removed
red, flashing: error, program function object not detected

programming , output function setting

10 ... 30 V DC , ripple 10 %

SS

≤ 800 mW

1 voltage output 0 ... 10 V

Voltage output: ≥ 1000 Ohm

compensation)

polyurethane, cover PBT

Characteristic response curves

90 80 70 60 50 40 30

0.0

0.1

0.2

0.3

Distance [m]

Curve 1: flat surface 100 mm x 100 mm
Curve 2: round bar, Ø 25 mm

2

0.4 0.5 0.6 0.7 0.8

Angle [degrees]

1

Dimensions

M30x1.5

20

10

0

-10

-20

5

36

LED

Temperature probe

Coded plug

114

22

27.5

Release date: 2013-02-26 15:42 Date of issue: 2013-02-26 034020_eng.xml

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany

Pepperl+Fuchs Group • • • •

1

Ultrasonic sensor UC500-30GM-IU-V1

Electrical Connection

Standard symbol/Connection:

(version IU)

1

(BN)

(BK)

U

Core colours in accordance with EN 60947-5-2.

4

2

(WH)

3

(BU)

+ U

B

4-20 mA

0-10 V

- U

B

Pinout

Connector V1

2

1

3

4

Accessories

BF 30

Mounting flange, 30 mm

BF 30-F

Mounting flange with dead stop, 30 mm

BF 5-30

Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mm

OMH-04

Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mm

UVW90-M30

Ultrasonic -deflector

UVW90-K30

Ultrasonic -deflector

UC-30GM-PROG

Additional Information

Programmed analogue output function

Analogue function

1)

2)

Near distance

of evaluation

4 mA/
0 V

20 mA/
10 V

Far distance
of evaluation

20 mA/10 V

4 mA/0 V

DA5-IU-2K-V

Process control and indication equipment

V1-G-2M-PVC

Cable socket, M12, 4-pin, PVC cable

V1-W-2M-PVC

Cable socket, M12, 4-pin, PVC cable

Description of the sensor functions

This ultrasonic sensor features a four-pole temperature/TEACH-IN plug, that can be
connected in four different positions. These have the following significance.

Plug position Meaning

A1 TEACH-IN evaluation limit A1

A2 TEACH-IN evaluation limit A2

E2/E3 Switching: falling/rising ramp

T Temperature compensation

Description of the TEACH-IN procedure

- Remove temperature plug

- Cut and restore supply voltage (e.g. by removing and replacing unit plug)

TEACH-IN of evaluation limits A1 or A2

- Set object to desired evaluation limit

- Connect TEACH-IN plug in pos. A1 or A2

- Green LED flashes when object detected, red LED flashes when no object detected

- Pull the plug (the current object position is taught and stored when the plug is removed!!)

TEACH-IN of output function

- Connect TEACH-IN plug in pos. E2/E3

- The yellow LED indicates the output function
E2: falling ramp

2

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany

Pepperl+Fuchs Group • • • •

Release date: 2013-02-26 15:42 Date of issue: 2013-02-26 034020_eng.xml