Pepperl Fuchs UB6000-30GM-E4-V15 Data Sheet

Ultrasonic sensor UB6000-30GM-E4-V15

Technical data

General specifications

Sensing range 350 ... 6000 mm Adjustment range 400 ... 6000 mm Dead band 0 ... 350 mm Standard target plate 100 mm x 100 mm Transducer frequency approx. 65 kHz Response delay approx. 650 ms

Indicators/operating means

Model Number

UB6000-30GM-E4-V15

Single head system

Features

• Switch output

• 5 different output functions can be set

•Program input

• Synchronization options

• Deactivation option

• Temperature compensation

• Insensitive to compressed air

Diagrams

Characteristic response curve

Distance Y [m]

1.5

1.0

0.5

0.0

-0.5

-1.0

-1.5

0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0

Curve 1: flat surface 100 mm x 100 mm Curve 2: round bar, Ø 25 mm

Distance X [m]

LED green solid: Power-on

LED yellow solid: switching state switch output

LED red normal operation: "fault"

Electrical specifications

Operating voltage U No-load supply current I

Input/Output

Synchronization bi-directional

Synchronization frequency

Common mode operation ≤ 7 Hz Multiplex operation ≤ 7 Hz / n , n = number of sensors , n ≤ 5

Input

Input type 1 program input,

Output

Output type 1 switch output NPN , Normally open/closed , programmable Rated operating current I Voltage drop U Repeat accuracy ≤ 0.5 % of switching point Switching frequency f ≤ 0.8 Hz Range hysteresis H 1 % of the set operating distance Temperature influence < 2 % of far switch point

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type Connector M12 x 1 , 5-pin Degree of protection IP65 Material

Housing nickel plated brass; plastic components: PBT Transducer epoxy resin/hollow glass sphere mixture; polyurethane foam

Mass 250 g

Factory settings

Output Switch point A1: 880 mm

Compliance with standards and directives

Standard conformity

Standards EN 60947-5-2:2007 + A1:2012

Approvals and certificates

UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V

flashing: program function object detected

flashing: program function

program function: no object detected

10 ... 30 V DC , ripple 10 % ≤ 50 mA

0 level -U 1 level: +4 V...+U input impedance: > 12 KOhm synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms

operating range 1: -U +U input impedance: > 4.7 kΩ; program pulse: ≥ 1 s

200 mA , short-circuit/overload protected ≤ 2.5 V

Switch point A2: 6300 mm output function: Window mode output behavior: NO contact

IEC 60947-5-2:2007 + A1:2012

...+1 V

... +1 V, operating range 2: +4 V ...

Release date: 2016-04-25 09:39 Date of issue: 2016-04-25 097973_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Ultrasonic sensor UB6000-30GM-E4-V15

Dimensions

Additional Information

Programmable output modes

1. Window mode, normally open mode

ø73

32.5

A1 < A2:

2. Window mode, normally closed mode A2 < A1:

3. One switch point, normally open mode A1 -> ∞:

112

4. One switch point, normally closed mode A2 -> ∞:

5. A1 -> ∞, A2 -> ∞: Object presence detection mode Object detected: Switch output closed No object detected: Switch output open

LED

M30 x 1.5

object distance

Electrical Connection

Standard symbol/Connections:

(version E4, npn)

Wire colors in accordance with EN 60947-5-2.

Pinout

Wire colors in accordance with EN 60947-5-2

1 BN 2 WH 3 BU 4 BK 5 GY

(BN)

(BK)

4 2

(WH)

(GY)

(BU)

+ U

Switch output

Program input

Sync. input

- U

(brown) (white) (blue) (black) (gray)

Release date: 2016-04-25 09:39 Date of issue: 2016-04-25 097973_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

+ 2 hidden pages