PEPPERL+FUCHS UB120-12GM-E5-V1 Datasheet

Single head system

(Torque)
max. 10 Nm

41

70

LED

17

M12x1

4

6

M12x1

48.4

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Dimensions

Ultrasonic sensor

UB120-12GM-E5-V1

Extremely narrow projection cone

<

Switch output

<

Very small unusable area

<

5 different output functions can be set

<

Short response time

<

Technical Data

General specifications

Sensing range 15 ... 120 mm

Adjustment range 20 ... 120 mm

Dead band 0 ... 15 mm

Standard target plate 10 mm x 10 mm

Transducer frequency approx. 850 kHz

Response delay approx. 9 ms

Indicators/operating means

LED yellow indication of the switching state

Release date: 2021-02-25 Date of issue: 2021-02-25 Filename: 188174_eng.pdf

flashing: program function object detected

1

+ U

B

Teach input

Switch output

- U

B

Core colours in accordance with EN 60947-5-2.

Standard symbol/Connections:

(version E5, pnp)

3 (BU)

1 (BN)

2 (WH)

4 (BK)

U

1

3

4

2

Ultrasonic sensor UB120-12GM-E5-V1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Technical Data

LED red solid red: Error

red, flashing: program function, object not detected

Electrical specifications

Operating voltage U

No-load supply current I

10 ... 30 V DC , ripple 10 %

B

≤ 30 mA

0

SS

Input

Input type 1 program input

operating distance 1: -UB ... +1 V, operating distance 2: +6 V ... +U
input impedance: > 4,7 kΩ program pulse: ≥ 1 s

Output

Output type 1 switch output PNP Normally open/closed , programmable

Rated operating current I

100 mA , short-circuit/overload protected

e

Default setting Switch point A1: 20 mm Switch point A2: 120 mm

Voltage drop U

≤ 3 V

d

Repeat accuracy ≤ 1 %

Switching frequency f ≤ 52 Hz

Range hysteresis H 1 % of the set operating distance

Temperature influence ± 1.5 % of full-scale value

Compliance with standards and directives

Standard conformity

Standards EN 60947-5-2:2007+A1:2012

IEC 60947-5-2:2007 + A1:2012

Approvals and certificates

UL approval cULus Listed, Class 2 Power Source

CCC approval CCC approval / marking not required for products rated ≤36 V

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)

Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type Connector M12 x 1 , 4-pin

Degree of protection IP67

Material

Housing brass, nickel-plated

Transducer epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT

Mass 25 g

B

Connection

Connection Assignment

Release date: 2021-02-25 Date of issue: 2021-02-25 Filename: 188174_eng.pdf

2

1 BN
2 WH
3 BU
4 BK

Wire colors in accordance with EN 60947-5-2

(brown)
(white)
(blue)
(black)

Characteristic response curve

Distance X [mm]

Distance Y [mm]

Curve 1: flat surface 10 mm x 10 mm
Curve 2: round bar, Ø 8 mm

0 25 50 75 100 125 150 175 200

75

50

25

0

-25

-50

-75

1

2

X

Y

Programmable output modes

1. Window mode, normally open mode
A1 < A2:

2. Window mode, normally closed mode
A2 < A1:

3. One switch point, normally open mode
A1 -> ∞:

5. A1 -> ∞, A2 -> ∞: Object presence detection mode
Object detected: Switch output closed
No object detected: Switch output open

4. One switch point, normally closed mode
A2 -> ∞:

object distance

A1

A2

A2

A1

A2

A1

Ultrasonic sensor UB120-12GM-E5-V1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Characteristic Curve

Programming

Accessories

UB-PROG2 Programming unit

BF 5-30 Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mm

Release date: 2021-02-25 Date of issue: 2021-02-25 Filename: 188174_eng.pdf

BF 12 Mounting flange, 12 mm

BF 12-F Plastic mounting adapter, 12 mm

3

Ultrasonic sensor UB120-12GM-E5-V1

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Accessories

V1-G-2M-PVC Female cordset single-ended M12 straight A-coded, 4-pin, PVC cable grey

V1-W-2M-PUR Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable grey

UVW90-M12 Ultrasonic -deflector

M12K-VE Plastic nuts with centering ring for the vibration-free mounting of cylindrical sensors

Release date: 2021-02-25 Date of issue: 2021-02-25 Filename: 188174_eng.pdf

4

Germany: [phone]Pepperl+Fuchs Group

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

USA: [phone] Singapore: [phone]

www.pepperl-fuchs.com [e-mail] [e-mail]

[e-mail]

Ultrasonic sensor

UB120-12GM-E5-V1

Teach-In

Adjusting the switching points

The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage

or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate

-U

B

whether the sensor has recognised the target during the TEACH-IN procedure. Switching point A1 is taught with -U
+UB.

Five different output functions can be set

1. Window mode, normally-open function

2. Window mode, normally-closed function

3. one switching point, normally-open function

4. one switching point, normally-closed function

5. Detection of object presence

TEACH-IN window mode, normally-open function

• Set target to near switching point

• TEACH-IN switching point A1 with -U

B

• Set target to far switching point

• TEACH-IN switching point A2 with +U

B

TEACH-IN window mode, normally-closed function

• Set target to near switching point

• TEACH-IN switching point A2 with +U

B

• Set target to far switching point

• TEACH-IN switching point A1 with -U

B

TEACH-IN switching point, normally-open function

• Set target to near switching point

• TEACH-IN switching point A2 with +U

B

• Cover sensor with hand or remove all objects from sensing range

• TEACH-IN switching point A1 with -U

B

TEACH-IN switching point, normally-closed function

• Set target to near switching point

• TEACH-IN switching point A1 with -U

B

• Cover sensor with hand or remove all objects from sensing range

• TEACH-IN switching point A2 with +U

B

TEACH-IN detection of objects presence

• Cover sensor with hand or remove all objects from sensing range

• TEACH-IN switching point A1 with -U

• TEACH-IN switching point A2 with +U

B

B

LED Displays

, A2 with

B

Displays in dependence on operating mode Red LED Yellow LED

TEACH-IN switching point:

Object detected
No object detected
Object uncertain (TEACH-IN invalid)
Normal operation off Switching state
Fault on Previous state

off
flashes
On

flashes
off
off

If the sensor is installed at places, where the environment temperature can fall below 0 °C, for the sensors fixation, one of the
mounting flanges BF 12, BF 12-F or BF 5-30 must be used. In case of direct mounting of the sensor in a through hole, it has to be
fixed at the middle of the housing thread.

Release date: 2021-02-25 Date of issue: 2021-02-25 Filename: 188174_eng.pdf

5