Inductive slot sensor SJ2-SN
Technical Data
General specifications
Switching function Normally closed (NC)
Output type NAMUR with safety function
Slot width 2 mm
Depth of immersion (lateral) 5 ... 7 typ. 6 mm
Reference target 5 x 8 x 0.5 mm3, Al
0102
Model Number
SJ2-SN
Features
• 2 mm slot width
• Usable up to SIL 3 acc. to IEC 61
508
Application
Danger!
In security applications, the sensor must be operated on a quali-
fied safety switch amplifier from
Pepperl+Fuchs (e.g., KFD2-SH-Ex1).
Observe the "exida Functional Safety Assessment" document, which belongs to this
sensor and is available as part of the product
documentation from www.pepperlfuchs.com.
Attention!
NAMUR-compliant switch amplifiers can,
due to a low current consumption at the recorded measuring plate (0.2 mA ... 1 mA), incorrectly report cable breaks (required in
accordance with EN 60947-5-6:2000: 0.4 mA
... 1 mA).
Safety Integrity Level (SIL) up to SIL3 acc. to IEC 61508 Danger! In safety-related applications
Output type 2-wire
Nominal ratings
Nominal voltage Uo8.2 V
Switching frequency f 0 ... 5000 Hz
Hysteresis H with NAMUR switch amplifier: 0.02 mm (e. g. Pepperl+Fuchs
Suitable for 2:1 technology yes , with reverse polarity protection diode
Rate of current rise -11 mA / mm
Current consumption
Measuring plate not detected
Measuring plate detected
Functional safety related parameters
Safety Integrity Level (SIL) SIL 3
MTTFd 11800 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection type flexible leads LIFYW , 500 mm
Core cross-section 0.06 mm
Housing material PBT
Degree of protection IP67
Mass 2.5 g
No
te adjustable
General information
Use in the hazardous area see instruction manuals
Compliance with standards and
directives
Standard conformity
MUR
NA
Standards
Approvals and certificates
EAC conformity TR CU 012/2011
FM approval
Control drawing
UL approval cULus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
) 20 a
M
Dimensions
the sensor must be operated with a qualified fail safe interface from
Pepperl+Fuchs, such as KFD2-SH-EX1.
Consider the "exida Functional Safety Assessment" document
which is available on www.pepperl-fuchs.com as an integral part of
this product's documentation.
KCD2-SR-Ex1.LB)
with safety switch amplifier 0.01 mm (e. g. Pepperl+Fuchs KFD2SH-Ex1)
≥ 3 mA
0.2 ... 1 mA
2
stop
EN 60947-5-6:2000
IEC 60947-5-6:1999
EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
116-0165F
Release date: 2018-04-19 08:24 Date of issue: 2018-04-19 273025_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
6
111
ø1.5
8
3.5
15
4.2
1
Inductive slot sensor SJ2-SN
Electrical Connection
BN
BU
L+
L-
Release date: 2018-04-19 08:24 Date of issue: 2018-04-19 273025_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...