Pepperl Fuchs OQT150-R101-2EP-IO-V31-L Data Sheet

		Measuring sensor with multiple switch points	OQT150-R101-2EP-IO-V31-L

<![if ! IE]>

<![endif]>Release date: 2018-06-08 14:44 Date of issue: 2018-06-08 267075-100168_eng.xml

Model Number

OQT150-R101-2EP-IO-V31-L

Triangulation sensor (SbR) with 4-pin, M8 x 1 connector

Features

•Miniature design with versatile mounting options

•Multi Pixel Technology (MPT) - flexibility and adaptability

•Reduction of device variety - several switch points within one sensor

•DuraBeam Laser Sensors - durable and employable like an LED

•Reliable detection of all surfaces, independent of color and structure

•IO-link interface for service and process data

Product information

The R101 series miniature optical sensors are the first devices of their kind to offer an end-to-end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks.

The entire series enables sensors to communicate via IO-Link.

The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor.

The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

Dimensions

20.5

18.3

6.6

<![if ! IE]>

<![endif]>13.9

8			6.4				9.85
			3
				(2x)			<![if ! IE]> <![endif]>3.25
			ø
			.2
			3
<![if ! IE]> <![endif]>7.2		<![if ! IE]> <![endif]>1.9	<![if ! IE]> <![endif]>3			<![if ! IE]> <![endif]>8.8		Emitter
M2	(2x)	<![if ! IE]> <![endif]>(27.3)	<![if ! IE]> <![endif]>15	<![if ! IE]> <![endif]>25.4	<![if ! IE]> <![endif]>31.9	<![if ! IE]> <![endif]>8.5	<![if ! IE]> <![endif]>19.95
<![if ! IE]> <![endif]>41.4								Receiver

<![if ! IE]> <![endif]>7.6

M8x1

Electrical connection

1

L+

4

C/Q

2

Q2

3

L-

Pinout

		Wire colors in accordance with EN 60947-5-2
		1		BN	(brown)
2	4	2		WH	(white)
		3		BU	(blue)
1	3	4		BK	(black)

Indicators/operating means

	5
			1	TEACH-IN button
	4		2	Mode rotary switch
			3	Switch output indicator Q2
			4	Switch output indicator Q1
	3	1	5	Operating indicator
	2
		V
			I	Switch output 1 / switch point B
	IV	I	II Switch output 1 / switch point A
			III	Switch output 2 / switch point A
	<![if ! IE]> <![endif]>Q2	<![if ! IE]> <![endif]>Q1
			IV	Switch output 2 / B
	III	II	V	Keylock

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.	1

Measuring sensor with multiple switch points

Technical data

General specifications

Detection range		8 ... 150 mm
Detection range min.		8 ... 20 mm
Detection range max.		8 ... 150 mm
Adjustment range		20 ... 150 mm
Reference target		standard white, 100 mm x 100 mm
Light source		laser diode
Light type		modulated visible red light
Laser nominal ratings
Note		LASER LIGHT , DO NOT STARE INTO BEAM
Laser class		1
Wave length		680 nm
Beam divergence		> 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length		3 s
Repetition rate		approx. 3 kHz
max. pulse energy		15.2 nJ
Black/White difference (6 %/90 %)		< 3 % at 150 mm
Diameter of the light spot		approx. 2 mm at a distance of 150 mm
Angle of divergence		approx. 1 °
Ambient light limit		EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd		560 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green:
		constantly on - power on
		flashing (4Hz) - short circuit
		flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow:
		constantly on - switch output active
		constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage	UB	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I0	< 20 mA at 24 V supply voltage
Protection class		III
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Device profile		Smart Sensor
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		2.3 ms
Process data witdh		Process data input 2 Bit
		Process data output 2 Bit
SIO mode support		yes
Device ID		0x110802 (1116162)
Compatible master port type		A
Output
Switching type		The default setting is:
		C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
		Q2 - Pin2: NPN normally open, PNP normally closed
Signal output		2 push-pull (4 in 1)outputs, short-circuit protected, reverse
		polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	Ud	≤ 1.5 V DC
Switching frequency	f	217 Hz
Response time		2.3 ms
Conformity
Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Laser safety		EN 60825-1:2014
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width		13.9 mm
Housing height		41.4 mm
Housing depth		18.3 mm
Degree of protection		IP67 / IP69 / IP69K

2Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

OQT150-R101-2EP-IO-V31-L

Laserlabel

Accessories

IO-Link-Master02-USB

IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connection

OMH-R101

Mounting Clamp

OMH-R101-Front

Mounting Clamp

OMH-4.1

Mounting Clamp

OMH-ML6

Mounting bracket

OMH-ML6-U

Mounting bracket

OMH-ML6-Z

Mounting bracket

<![if ! IE]> <![endif]>eng.xml

V31-GM-2M-PUR

Female cordset, M8, 4-pin, PUR cable

<![if ! IE]> <![endif]>100168-

V31-WM-2M-PUR

<![if ! IE]> <![endif]>267075

Female cordset, M8, 4-pin, PUR cable

Other suitable accessories can be found at

<![if ! IE]> <![endif]>-06-08

<![if ! IE]> <![endif]>Date of issue: 2018

<![if ! IE]> <![endif]>-06-08 14:44

<![if ! IE]> <![endif]>Release date: 2018