Pepperl Fuchs OQT150-R101-2EP-IO-V31 Data Sheet
Measuring sensor with multiple switch points
Dimensions
18.3
OQT150-R101-2EP-IO-V31
20.5
6.6
13.9
Model Number
OQT150-R101-2EP-IO-V31
Triangulation sensor (SbR)
with 4-pin, M8 x 1 connector
Features
• Miniature design with versatile
mounting options
• Multi Pixel Technology (MPT) flexibility and adaptability
• Reduction of device variety - several
switch points within one sensor
• Reliable detection of all surfaces,
independent of color and structure
• Low sensitivity to target color
• IO-link interface for service and
process data
8
7.2
M2 (2x)
41.4
7.6
M8x1
Electrical connection
1
L+
4
C/Q
2
Q2
3
L-
Pinout
Wire colors in accordance with EN 60947-5-2
1 BN
24
13
2 WH
3 BU
4 BK
Indicators/operating means
(27.3)
6.4
3
ø 3.2 (2x)
(brown)
(white)
(blue)
(black)
315
25.4
31.9
1.9
9.85
3.2519.95
8.8
8.5
Emitter
Receiver
Product information
The R101 series miniature optical sensors
are the first devices of their kind to offer an
end-to-end solution in a small single standard
design — from thru-beam sensor through to a
distance measurement device. As a result of
this design, the sensors are able to perform
practically all standard automation tasks.
The entire series enables sensors to
communicate via IO-Link.
The DuraBeam laser sensors are durable and
can be used in the same way as a standard
sensor.
The use of Multi Pixel Technology gives the
standard sensors a high level of flexibility and
enables them to adapt more effectively to
their operating environment.
Release date: 2018-06-08 14:44 Date of issue: 2018-06-08 267075-100162_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Q2
5
1 TEACH-IN button
4
2 Mode rotary switch
3 Switch output indicator Q2
4 Switch output indicator Q1
3
2
1
5 Operating indicator
V
I Switch output 1 / switch point B
IV
I
Q1
IIIII
II Switch output 1 / switch point A
III Switch output 2 / switch point A
IV Switch output 2 / B
V Keylock
1
Measuring sensor with multiple switch points
OQT150-R101-2EP-IO-V31
Technical data
General specifications
Detection range 5 ... 150 mm
Detection range min. 5 ... 20 mm
Detection range max. 5 ... 150 mm
Adjustment range 20 ... 150 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Black/White difference (6 %/90 %) < 5 % at 150 mm
Diameter of the light spot approx. 10 mm at a distance of 150 mm
Angle of divergence approx. 4 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
Function indicator LED yellow:
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage UB10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Device profile Smart Sensor
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Process data input 2 Bit
SIO mode support yes
Device ID 0x110801 (1116161)
Compatible master port type A
Output
Switching type The default setting is:
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop Ud≤ 1.5 V DC
Switching frequency f 217 Hz
Response time 2.3 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F)
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
constantly on - switch output active
constantly off - switch output inactive
< 25 mA at 24 V supply voltage
0
Process data output 2 Bit
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
polarity protected, overvoltage protected
Accessories
IO-Link-Master02-USB
IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection
OMH-R101
Mounting Clamp
OMH-R101-Front
Mounting Clamp
OMH-4.1
Mounting Clamp
OMH-ML6
Mounting bracket
OMH-ML6-U
Mounting bracket
OMH-ML6-Z
Mounting bracket
V31-GM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
V31-WM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
Other suitable accessories can be found at
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 13.9 mm
Housing height 41.4 mm
Housing depth 18.3 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g
Approvals and certificates
UL approval E87056 , cULus Listed , class 2 power supply , type rating 1
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2018-06-08 14:44 Date of issue: 2018-06-08 267075-100162_eng.xml
Loading...