Pepperl Fuchs OQT150-R101-2EP-IO-0.3M-V1 Data Sheet

		Measuring sensor with multiple switch points	OQT150-R101-2EP-IO-0,3M-V1

<![if ! IE]>

<![endif]>Release date: 2018-06-08 14:44 Date of issue: 2018-06-08 267075-100164_eng.xml

Model Number

OQT150-R101-2EP-IO-0,3M-V1

Triangulation sensor (SbR)

with fixed cable and M12 connector, 4-pin

Features

•Miniature design with versatile mounting options

•Multi Pixel Technology (MPT) - flexibility and adaptability

•Reduction of device variety - several switch points within one sensor

•Reliable detection of all surfaces, independent of color and structure

•Low sensitivity to target color

•IO-link interface for service and process data

Product information

The R101 series miniature optical sensors are the first devices of their kind to offer an end-to-end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks.

The entire series enables sensors to communicate via IO-Link.

The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor.

The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

Dimensions

8

<![if ! IE]>

<![endif]>7.2

M2	(2x)

3.3

<![if ! IE]> <![endif]>300 ±10

M12x1

Electrical connection

1

L+

4

C/Q

2

Q2

3

L-

6.4

<![if ! IE]>

<![endif]>13.9

	6.4
	3	(2x)
	.2
	3
	ø
	<![if ! IE]> <![endif]>3
<![if ! IE]> <![endif]>(27.3)	<![if ! IE]> <![endif]>1.9
	<![if ! IE]> <![endif]>15	<![if ! IE]> <![endif]>25.4	<![if ! IE]> <![endif]>31.9
	20.5
	18.3

	9.85
	<![if ! IE]> <![endif]>3.25
<![if ! IE]> <![endif]>8.8
<![if ! IE]> <![endif]>8.5	<![if ! IE]> <![endif]>19.95

Emitter

Receiver

Pinout

		Wire colors in accordance with EN 60947-5-2
1		1	BN	(brown)
		2	WH	(white)
2	4	3	BU	(blue)
		4	BK	(black)
3
Indicators/operating means
5
				1	TEACH-IN button
4				2	Mode rotary switch
				3	Switch output indicator Q2
				4	Switch output indicator Q1
3		1		5	Operating indicator
2
V
				I	Switch output 1 / switch point B
IV		I		II	Switch output 1 / switch point A
				III	Switch output 2 / switch point A
<![if ! IE]> <![endif]>Q2		<![if ! IE]> <![endif]>Q1
				IV	Switch output 2 / B
III		II		V	Keylock

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.	1

		Measuring sensor with multiple switch points	OQT150-R101-2EP-IO-0,3M-V1

Technical data

General specifications

Detection range		5 ... 150 mm
Detection range min.		5 ... 20 mm
Detection range max.		5 ... 150 mm
Adjustment range		20 ... 150 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Black/White difference (6 %/90 %)		< 5 % at 150 mm
Diameter of the light spot		approx. 10 mm at a distance of 150 mm
Angle of divergence		approx. 4 °
Ambient light limit		EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd		600 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green:
		constantly on - power on
		flashing (4Hz) - short circuit
		flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow:
		constantly on - switch output active
		constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage	UB	10 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I0	< 25 mA at 24 V supply voltage
Protection class		III
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Device profile		Smart Sensor
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		2.3 ms
Process data witdh		Process data input 2 Bit
		Process data output 2 Bit
SIO mode support		yes
Device ID		0x110801 (1116161)
Compatible master port type		A
Output
Switching type		The default setting is:
		C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
		Q2 - Pin2: NPN normally open, PNP normally closed
Signal output		2 push-pull (4 in 1)outputs, short-circuit protected, reverse
		polarity protected, overvoltage protected
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	Ud	≤ 1.5 V DC
Switching frequency	f	217 Hz
Response time		2.3 ms
Conformity
Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F) , fixed cable
		-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for
		conveyor chains
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width		13.9 mm
Housing height		33.8 mm
Housing depth		18.3 mm
Degree of protection		IP67 / IP69 / IP69K
Connection		300 mm fixed cable with M12 x 1, 4-pin connector
Material
Housing		PC (Polycarbonate)
Optical face		PMMA
Mass		approx. 17 g
Cable length		0.3 m

2Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Accessories

IO-Link-Master02-USB

IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connection

V1-G-2M-PUR

Female cordset, M12, 4-pin, PUR cable

V1-W-2M-PUR

Female cordset, M12, 4-pin, PUR cable

OMH-R101

Mounting Clamp

OMH-R101-Front

Mounting Clamp

OMH-4.1

Mounting Clamp

OMH-ML6

Mounting bracket

OMH-ML6-U

Mounting bracket

OMH-ML6-Z

Mounting bracket

V31-GM-2M-PUR

Female cordset, M8, 4-pin, PUR cable

V31-WM-2M-PUR

Female cordset, M8, 4-pin, PUR cable

Other suitable accessories can be found at

<![if ! IE]>

<![endif]>Release date: 2018-06-08 14:44 Date of issue: 2018-06-08 267075-100164_eng.xml