Pepperl Fuchs OQT120-R103-2EP-IO0.3M-V1-L Data Sheet
Measuring sensor with multiple switch points
Dimensions
OQT120-R103-2EP-IO-0,3M-V1-L
26.7
10.2
15
Model Number
OQT120-R103-2EP-IO-0,3M-V1-L
Triangulation sensor (SbR)
with fixed cable and M12 connector, 4-pin
Features
• Miniature design with versatile
mounting options
• Multi Pixel Technology (MPT) flexibility and adaptability
• Reduction of device variety - several
switch points within one sensor
• DuraBeam Laser Sensors - durable
and employable like an LED
• Reliable detection of all surfaces,
independent of color and structure
• IO-link interface for service and
process data
Product information
The R103 series miniature optical sensors
are the first devices of their kind to offer an
end-to-end solution in a small single standard
design — from thru-beam sensor through to a
distance measurement device. As a result of
this design, the sensors are able to perform
practically all standard automation tasks.
The entire series enables sensors to
communicate via IO-Link.
The DuraBeam laser sensors are durable and
can be used in the same way as a standard
sensor.
The use of Multi Pixel Technology gives the
standard sensors a high level of flexibility and
enables them to adapt more effectively to
their operating environment.
24.1
L
45
M12 x 1
14.8
Electrical connection
1
L+
4
C/Q
2
Q2
3
L-
Pinout
1
2
4
3
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
Indicators/operating means
2
1
3
4
5
V
IV
Q2
I
Q1
IIIII
M18 x 1
(brown)
(white)
(blue)
(black)
Reveiver
Emitter
ø 3.5 x 2
1 Teach-in button
2 Mode rotary switch
3 Switch output indicator Q2
4 Switch output indicator Q1
5 Operating indicator
I Switch output 1 / switch point B
II Switch output 1 / switch point A
III Switch output 2 / switch point A
IV Switch output 2 / switch point B
V Keylock
8.5 13.6
36.5
Release date: 2018-06-08 14:45 Date of issue: 2018-06-08 267075-100362_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Measuring sensor with multiple switch points
OQT120-R103-2EP-IO-0,3M-V1-L
Technical data
General specifications
Detection range 8 ... 120 mm
Detection range min. 8 ... 20 mm
Detection range max. 8 ... 120 mm
Adjustment range 20 ... 120 mm
Reference target standard white, 100 mm x 100 mm
Light source laser diode
Light type modulated visible red light
Laser nominal ratings
Note LASER LIGHT , DO NOT STARE INTO BEAM
Laser class 1
Wave length 680 nm
Beam divergence > 5 mrad ; d63 < 1 mm in the range of 50 mm ... 250 mm
Pulse length 3 µs
Repetition rate approx. 3 kHz
max. pulse energy 15.2 nJ
Black/White difference (6 %/90 %) < 3 % at 120 mm
Diameter of the light spot approx. 2 mm at a distance of 120 mm
Angle of divergence approx. 1 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Functional safety related parameters
MTTFd 560 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
Function indicator LED yellow:
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage UB10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Device profile Smart Sensor
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Process data input 2 Bit
SIO mode support yes
Device ID 0x110804 (1116164)
Compatible master port type A
Output
Switching type The default setting is:
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop U
Switching frequency f 217 Hz
Response time 2.3 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Laser safety EN 60825-1:2014
Ambient conditions
Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 15 mm
Housing height 36.5 mm
Housing depth 26.7 mm
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
) 20 a
M
0
d
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
constantly on - switch output active
constantly off - switch output inactive
< 20 mA at 24 V supply voltage
Process data output 2 Bit
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
polarity protected, overvoltage protected
≤ 1.5 V DC
-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for
conveyor chains
2
Laserlabel
Accessories
IO-Link-Master02-USB
IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable
OMH-R103-01
Mounting bracket
V31-GM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
V31-WM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
OMH-R101-Front
Mounting Clamp
OMH-R101
Mounting Clamp
OMH-4.1
Mounting Clamp
OMH-ML6
Mounting bracket
OMH-ML6-U
Mounting bracket
OMH-ML6-Z
Mounting bracket
Other suitable accessories can be found at
Release date: 2018-06-08 14:45 Date of issue: 2018-06-08 267075-100362_eng.xml
Loading...