Pepperl Fuchs OPC120W-F200-R2 Data Sheet
Stationary read device OPC120W-F200-R2
Function
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and
detection tasks in the field of printing, paper, and packaging.
Whether reading 1D and 2D codes at high speeds, at varying intervals, with reflective surfaces, with overly long barcodes or performing diverse detection tasks — with the Optical Print
Inspector, you always have the right Vision Sensor at your disposal.
Indicating / Operating means
Model Number
OPC120W-F200-R2
Optical Print Inspector, reads all common 1-D and 2-D codes, detects logos,
Ethernet, RS 232, speeds of up to 6 m/s
Features
• Reads 1-D and 2-D codes at high
speeds of up to 6 m/s at 30 readings/s
• High depth of focus
• Code quality index output
• Logo comparison
•Presence detection
1 2 3 4 5 6
Electrical connection
RS 232
1
5
4
Pin Signal
1 +UB
2 TX RS232
3 GND
4 RX RS232
5 NC
LAN
3
2
Pin Signal
1 TX+ Ethernet
2 RX+ Ethernet
3 TX- Ethernet
4 RX- Ethernet
1 LED DIAG2 yellow
7
2
3
4
1
2 LED DIAG1 yellow
3 LED POWER green
4 LED READY yellow
5 LED BAD yellow
6 LED GOOD yellow
7 LED TRIGGER yellow
(24 V DC + I/O)
Pin Signal
1 IN Trigger
2 +UB
3 OUT Good
4 OUT Bad
5 IN 1
6 IN Encoder A
7 GND
8 OUT Matchcode
5
4
6
7
1
3
2
8
Release date: 2016-05-04 08:56 Date of issue: 2016-05-04 240399_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Technical data
General specifications
Light type Integrated LED lightning (white)
Symbologies Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharma-
Read distance 70 ... 180 mm Nominal distance: 120 mm
Reading field Minimum read field: 28 mm x 45 mm
Modul size Minimum module size: 0.2 mm
Evaluation frequency up to 30 Hz
Ta rg et ve lo ci ty triggered ≤ 6 m/s
Data Matrix
Symbol size rectangular up to 144 x 144 modules
Data format ASCII, C40, Text, X12, Edifact, Base 256 , all according to
Orientation omnidirectional
Nominal ratings
Camera
Type CMOS , Global shutter
Number of pixels 752 x 480 pixels
Gray scale 256
Image recording real-time , Program-controlled or triggered externally
code
Read field at nominal distance: 44 mm x 70 mm
Maximum read field: 63 mm x 100 mm
rectangular up to 16 x 48 modules
ISO 646
1
OPC120W-F200-R2Stationary read devic e
Functional safety related parameters
MTTFd 40.5 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: Ready for operation
LED indicator for good/poor reading
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
No-load supply current I
Power consumption P
Interface
Interface type serial , RS 232
Tran sf er ra te max. 115.2 kBit/s
Cable length max. 30 m
Interface 1
Interface type Ethernet
Protocol TCP/ IP
Transfer rate 100 MBit/s
Cable length max. 30 m
Input
Input voltage to be applied externally 24 V ± 15% PELV
Number/Type Trigger
Input current approx. 10 mA at 24 V DC
Switching threshold low: < 10 V, high: > 15 V
Cable length max. 30 m
Output
Number/Type GOOD, BAD, Matchcode
Switching type PNP
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Cable length max. 30 m
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP67
Connection 8-pin, M12x1 connector, standard (supply+IO) ,
Material
Housing PC/ABS
Installation 4 x M6 threading
Mass approx. 160 g
Compliance with standards and directives
Standard conformity
Noise immunity EN 61326-1
Emitted interference EN 61000-6-4
Degree of protection EN 60529
Laser class IEC 60825-1:2007
) 8 a
M
0
0
max. 250 mA
6 W
5-pin, M12x1 socket, standard (RS 232) ,
4-pin, M12x1 socket, standard (LAN)
Accessories
V19-G-2M-PUR-ABG
Female cordset, M12, 8-pin, shielded,
PUR cable
V15S-G-5M-PUR-ABG
Male cordset, M12, 5-pin, shielded, PUR
cable
V1SD-G-2M-PUR-ABG-V45-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V1SD-G-2M-PUR-ABG-V45X-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V19-G-ABG-PG9
Female connector, M12, 8-pin, shielded,
field attachable
PCV-MB1
Mounting bracket for PCV* read head
V19-G-0,2M-YOPC-0,2M-V1S/V31-G
Y connection cable
Other suitable accessories can be found at
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source, Type 1
CCC approval CCC approval / marking not required for products rated ≤36 V
Approvals CE
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
enclosure
2
Release date: 2016-05-04 08:56 Date of issue: 2016-05-04 240399_eng.xml
Loading...