Pepperl Fuchs OPC120P-F201-R2 Data Sheet
Stationary read device OPC120P-F201-R2
Function
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and
detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces
and at varying intervals, with overly long barcodes or performing diverse detection tasks with
the Optical Print Inspector, you always have the right Vision Sensor at your disposal.
Indicating / Operating means
Model Number
OPC120P-F201-R2
Optical Print Inspector, reads all common 1-D and 2-D codes, detects logos,
Ethernet, RS 232, speeds of up to
10 m/s; polarization filter
Features
• Reads 1-D and 2-D codes at high
speeds of up to 10 m/s at 100 readings/s
• High depth of focus
• Reads barcodes up to 200 mm long
• Code quality index output
• Logo comparison
•Rotary encoder input
• Reliable on reflective surfaces through polarization filter technology
•Presence detection
1 2 3 4 5 6
Electrical connection
RS 232
1
5
4
Pin Signal
1 +UB
2 TX RS232
3 GND
4 RX RS232
5 NC
LAN
3
2
Pin Signal
1 TX+ Ethernet
2 RX+ Ethernet
3 TX- Ethernet
4 RX- Ethernet
1 LED DIAG2 yellow
7
2
3
4
1
2 LED DIAG1 yellow
3 LED POWER green
4 LED READY yellow
5 LED BAD yellow
6 LED GOOD yellow
7 LED TRIGGER yellow
(24 V DC + I/O)
Pin Signal
1 IN Trigger
2 +UB
3 OUT Good
4 OUT Bad
5 IN 1
6 IN Encoder A
7 GND
8 OUT Matchcode
5
4
6
7
1
3
2
8
Release date: 2016-05-04 08:56 Date of issue: 2016-05-04 256354_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Technical data
General specifications
Light type Integrated LED lightning (white)
Polarization filter yes
Symbologies Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharma-
Read distance 70 ... 180 mm
Reading field Minimum read field: 28 mm x 45 mm
Modul size Minimum module size: 0.2 mm
Evaluation frequency up to 100 Hz
Target velocity triggered ≤ 10 m/s
Data Matrix
Symbol size rectangular up to 144 x 144 modules
Data format ASCII, C40, Text, X12, Edifact, Base 256 , all according to
Orientation omnidirectional
Nominal ratings
Camera
Ty p e CMOS , Global shutter
Number of pixels 752 x 480 pixels
code
Nominal distance: 120 mm
Read field at nominal distance: 45 mm x 70 mm
Maximum read field: 65 mm x 105 mm
rectangular up to 16 x 48 modules
ISO 646
1
OPC120P-F201-R2Stationary read devic e
Gray scale 256
Image recording real-time , Program-controlled or triggered externally
Functional safety related parameters
MTTFd 40.5 a
Mission Time (TM) 8 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: Ready for operation
LED indicator for good/poor reading
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
No-load supply current I
Power consumption P06 W
Interface
Interface type serial , RS 232
Transfer rate max. 115.2 kBit/s
Cable length max. 30 m
Interface 1
Interface type Ethernet
Protocol TCP/IP
Tran sf er ra te 100 MBit/s
Cable length max. 30 m
Input
Input voltage to be applied externally 24 V ± 15% PELV
Number/Type Trigger
Input current approx. 10 mA at 24 V DC
Switching threshold low: < 10 V, high: > 15 V
Cable length max. 30 m
Output
Number/Type GOOD, BAD, Matchcode
Switching type PNP
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Cable length max. 30 m
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP67
Connection 8-pin, M12x1 connector, standard (supply+IO) ,
Material
Housing PC/ABS
Installation 4 x M6 threading
Mass approx. 160 g
Compliance with standards and directives
Standard conformity
Noise immunity EN 61326-1:2006
Emitted interference EN 61000-6-4:2007/A1:2011
Degree of protection EN 60529
Laser class IEC 60825-1:2007
max. 250 mA
0
5-pin, M12x1 socket, standard (RS 232) ,
4-pin, M12x1 socket, standard (LAN)
Accessories
V19-G-2M-PUR-ABG
Female cordset, M12, 8-pin, shielded,
PUR cable
V15S-G-5M-PUR-ABG
Male cordset, M12, 5-pin, shielded, PUR
cable
V1SD-G-2M-PUR-ABG-V45-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V1SD-G-2M-PUR-ABG-V45X-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V19-G-ABG-PG9
Female connector, M12, 8-pin, shielded,
field attachable
V19-G-0,2M-YOPC-0,2M-V1S/V31-G
Y connection cable
Other suitable accessories can be found at
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source, Type 1
CCC approval CCC approval / marking not required for products rated ≤36 V
Approvals CE
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
enclosure
2
Release date: 2016-05-04 08:56 Date of issue: 2016-05-04 256354_eng.xml
Loading...