
Stationary read device OPC120P-F201-B17
Function
With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and
detection tasks in the field of printing, paper, and packaging.
Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces
and at varying intervals, or performing various detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor close at hand.
Electrical connection
R
Model Number
OPC120P-F201-B17
Optical Print Inspector, reading of Data
Matrix codes, PROFINET, speeds up to
10 m/sec, polarization filter
Features
• Reading on highly reflective surfaces
with new polarization filter
• PROFINET interface with integrated
switch
• Reads Data Matrix codes at high
speeds of up to 10 m/s at
50 readings/s
Pinout
Main
Bus
1
2
3
4
5
6
7
8
1
2
3
4
IN TRIGGER
+ UB
USB_DM
USB_DP
NC
NC
GND
NC
TX +
RX +
TX -
RX -
Profinet 1 & 2Main
1
8
7
2
6
53
4
1
4
2
3
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Technical data
General specifications
Light type Integrated LED lightning (white)
Polarization filter yes
Symbologies Data Matrix
Read distance 70 ... 180 mm
Reading field Minimum read field: 28 mm x 45 mm
Modul size Minimum module size: 0.2 mm
Evaluation frequency up to 50 Hz
Target velocity triggered ≤ 10 m/s
Data Matrix
Symbol size rectangular up to 144 x 144 modules
Data format ASCII, C40, Text, X12, Edifact, Base 256 , all according to
Orientation omnidirectional
Nominal ratings
Camera
Ty p e CMOS , Global shutter
Number of pixels 752 x 480 pixels
Gray scale 256
Image recording real-time , Program-controlled or triggered externally
Functional safety related parameters
MTTFd 40.5 a
Mission Time (TM) 8 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
LED indicator 7 LEDs (communication, alignment aid, status information)
Nominal distance: 120 mm
Read field at nominal distance: 45 mm x 70 mm
Maximum read field: 65 mm x 105 mm
rectangular up to 16 x 48 modules
ISO 646
1

OPC120P-F201-B17Stationary read devic e
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
No-load supply current I
Power consumption P
Interface
Interface type 100 BASE-TX
Protocol PROFINET IO Real-Time (RT) Conformance class A
Transfer rate 100 MBit/s
Output
Switching type PNP
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Cable length max. 30 m
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 85 °C (-4 ... 185 °F)
Relative humidity 90 % , noncondensing
Mechanical specifications
Degree of protection IP65
Connection 8-pin, M12x1 connector, standard (supply+IO) ,
Material
Housing PC/ABS
Optical face Plastic pane
Installation 4 x M6 threading
Mass approx. 200 g
Compliance with standards and directives
Standard conformity
Noise immunity EN 61326-1:2006
Emitted interference EN 61000-6-4:2007/A1:2011
Degree of protection EN 60529
Laser class IEC 60825-1:2007
max. 300 mA
0
6 W
0
4-pin, M12x1 socket, D-coded (LAN) ,
4-pin, M12x1 socket, D-coded (LAN)
Accessories
V19-G-2M-PUR-ABG
Female cordset, M12, 8-pin, shielded,
PUR cable
V1SD-G-2M-PUR-ABG-V45-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V1SD-G-2M-PUR-ABG-V45X-G
Connection cable, M12 to RJ-45, PUR
cable 4-pin, CAT5e
V19-G-ABG-PG9
Female connector, M12, 8-pin, shielded,
field attachable
V19-G-0,2M-YOPC-0,2M-V1S/V31-G
Y connection cable
ries can be found at
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source, Type 1
CCC approval CCC approval / marking not required for products rated ≤36 V
Approvals CE
enclosure
Curves / Diagrams
Image field dimensions
Image field
60
50
40
30
20
10
0
10
20
30
40
50
0 20 40 60 80 100 120 140 160 180 200
Width Y
Width X
(Nominal distance)Operating distance [mm]
60
Release date: 2016-05-04 08:56 Date of issue: 2018-06-14 261656_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2