Pepperl Fuchs OMT300-R201-UEP-IO-V1 Data Sheet

		Distance sensor	OMT300-R201-UEP-IO-V1

<![if ! IE]>

<![endif]>Release date: 2019-02-11 11:04 Date of issue: 2019-10-31 295670-100281_eng.xml

Model Number

OMT300-R201-UEP-IO-V1

Distance sensor

with 4-pin, M12 x 1 connector

Features

•Medium design with versatile mounting options

•Space-saving distance sensors in small standardized design

•Multi Pixel Technology (MPT) - exact and precise signal evaluation

•IO-link interface for service and process data

•Analog output 0 ... 10 V DC

Product information

The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design—from the thru-beam sensor through to the measuring distance sensor. As a result of this design, the sensors are able to perform practically all standard automation tasks.

The entire series enables sensors to communicate via IO-Link.

The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor.

Multi Pixel Technology (MPT) ensures that the standard sensors are flexible and

can be adapted to the application environment.

Dimensions

<![if ! IE]> <![endif]>1.4		29.9	6
<![if ! IE]> <![endif]>Ref.			<![if ! IE]> <![endif]>ø 4.2
				Receiver
<![if ! IE]> <![endif]>61.7			<![if ! IE]> <![endif]>50	Emitter
			<![if ! IE]> <![endif]>29	<![if ! IE]> <![endif]>78.5
<![if ! IE]> <![endif]>4.2			<![if ! IE]> <![endif]>14
<![if ! IE]> <![endif]>6.2
5.8	7	7	<![if ! IE]> <![endif]>21.6
		41.7
<![if ! IE]> <![endif]>15

<![if ! IE]> <![endif]>14

<![if ! IE]> <![endif]>22.1

<![if ! IE]>

<![endif]>11.7

M12 x 1

Electrical connection

1

	4	L+
		C/Q
	2
		U
	3
		L-

Pinout

		Wire colors in accordance with EN 60947-5-2
1		1		BN	(brown)
		2		WH	(white)
2	4	3		BU	(blue)
		4		BK	(black)
3

Indicators/operating means

1		2			1	Mode rotary switch
				3	2	Teach-in button
					3	Switching output display Q1	YE
				4	4	Operating indicator	GN
		0			Q1B	Switching output/switch point B
	<![if ! IE]> <![endif]>B	<![if ! IE]> <![endif]>B
					Q1A	Switching output/switch point A
<![if ! IE]> <![endif]>Q2			<![if ! IE]> <![endif]>Q1
					Q2A	Analog output/value A
	<![if ! IE]> <![endif]>A	<![if ! IE]> <![endif]>A			Q2B	Analog output/value B
					0	Keylock

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

				1
	Pepperl+Fuchs Group

Distance sensor

Technical data

General specifications

Measurement range		100 ... 300 mm
Reference target		standard white, 100 mm x 100 mm
Light source		LED
Light type		modulated visible red light
LED risk group labelling		exempt group
Angle deviation		max. +/- 1.5 °
Diameter of the light spot		approx. 8 mm at a distance of 300 mm
Angle of divergence		1.8 °
Ambient light limit		EN 60947-5-2 : 45000 Lux
Resolution		0.1 mm
Functional safety related parameters
MTTFd		520 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Indicators/operating means
Operation indicator		LED green:
		constantly on - power on
		flashing (4Hz) - short circuit
		flashing with short break (1 Hz) - IO-Link mode
Function indicator		LED yellow:
		constantly on - switch output active
		constantly off - switch output inactive
Control elements		Teach-In key
Control elements		5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage	UB	18 ... 30 V DC
Ripple		max. 10 %
No-load supply current	I0	< 25 mA at 24 V supply voltage
Protection class		III
Interface
Interface type		IO-Link ( via C/Q = pin 4 )
Device profile		Identification and diagnosis
		Smart Sensor type 0/type 3.3
Transfer rate		COM 2 (38.4 kBaud)
IO-Link Revision		1.1
Min. cycle time		3 ms
Process data witdh		Process data input 4 byte
		Process data output 2 bits
SIO mode support		yes
Device ID		0x111916 (1120534)
Compatible master port type		A
Output
Switching type		The default setting is:
		C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
		U—Pin2: analog output 0 ... 10 V
Signal output		1 push-pull output , 1 analog output , short-circuit-proof, reverse
		polarity protection, surge-proof
Switching voltage		max. 30 V DC
Switching current		max. 100 mA , resistive load
Usage category		DC-12 and DC-13
Voltage drop	Ud	≤ 1.5 V DC
Response time		2 ms , see table 1
Analog output
Output type		1 voltage output: 0 ... 10 V
Load resistor		> 1 kΩ voltage output ; ≤ 470 Ω current output
Recovery time		2 ms
Conformity
Communication interface		IEC 61131-9
Product standard		EN 60947-5-2
Measurement accuracy
Temperature drift		0.05 %/K
Warm up time		5 min
Repeat accuracy		< 0.5 % , see table 1
Linearity error		0.5 %
Ambient conditions
Ambient temperature		10 ... 50 °C (50 ... 122 °F)
Storage temperature		-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width		15 mm
Housing height		61.7 mm
Housing depth		41.7 mm
Degree of protection		IP67 / IP69 / IP69K
Connection		4-pin, M12 x 1 connector, 90° rotatable
Material

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

2Pepperl+Fuchs Group

OMT300-R201-UEP-IO-V1

Accessories

V1-G-2M-PUR

Female cordset, M12, 4-pin, PUR cable

V1-W-2M-PUR

Female cordset, M12, 4-pin, PUR cable

IO-Link-Master02-USB

IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connection

OMH-RL31-02

Mounting bracket narrow

OMH-RL31-03

Mounting bracket narrow

OMH-RL31-04

Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mm

OMH-RL31-07

Mounting bracket including adjustment

OMH-R20x-Quick-Mount

Quick mounting accessory

Other suitable accessories can be found at

<![if ! IE]>

<![endif]>Release date: 2019-02-11 11:04 Date of issue: 2019-10-31 295670-100281_eng.xml