Pepperl Fuchs OMT200-R101-2EP-IO-V31 Data Sheet
Distance sensor
Dimensions
18.3
OMT200-R101-2EP-IO-V31
20.5
6.6
13.9
Model Number
OMT200-R101-2EP-IO-V31
Distance sensor
with 4-pin, M8 x 1 connector
Features
• Miniature design with versatile
mounting options
• Space-saving distance sensors in
small standardized design
• Multi Pixel Technology (MPT) - exact
and precise signal evaluation
• IO-link interface for service and
process data
8
41.4
7.6
M8x1
Electrical connection
1
L+
4
C/Q
2
Q2
3
L-
Pinout
24
13
7.2
M2 (2x)
1.9
(27.3)
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
6.4
(brown)
(white)
(blue)
(black)
3
ø 3.2 (2x)
315
25.4
31.9
9.85
3.2519.95
8.8
8.5
Emitter
Receiver
Product information
The R101 series miniature optical sensors
are the first devices of their kind to offer an
end-to-end solution in a small single standard
design — from thru-beam sensor through to a
distance measurement device. As a result of
this design, the sensors are able to perform
practically all standard automation tasks.
The entire series enables sensors to
communicate via IO-Link.
The DuraBeam laser sensors are durable and
can be used in the same way as a standard
sensor.
The use of Multi Pixel Technology gives the
standard sensors a high level of flexibility and
enables them to adapt more effectively to
their operating environment.
Indicators/operating means
5
4
3
2
IV
Q2
1
V
I
Q1
IIIII
1 TEACH-IN button
2 Mode rotary switch
3 Switch output indicator Q2
4 Switch output indicator Q1
5 Operating indicator
I Switch output 1 / switch point B
II Switch output 1 / switch point A
III Switch output 2 / switch point A
IV Switch output 2 / B
V Keylock
Release date: 2018-06-08 14:53 Date of issue: 2018-06-08 267075-100207_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Distance sensor
OMT200-R101-2EP-IO-V31
Technical data
General specifications
Measurement range 60 ... 200 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Angle deviation max. +/- 1.5 °
Diameter of the light spot approx. 12 mm at a distance of 200 mm
Angle of divergence 4 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Resolution 0.1 mm
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
Function indicator LED yellow:
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage UB10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
Protection class III
Interface
Interface type IO-Link ( via C/Q = pin 4 )
Device profile Smart Sensor
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 3 ms
Process data witdh Process data input 3 Byte
SIO mode support yes
Device ID 0x110905 (1116421)
Compatible master port type A
Output
Switching type The default setting is:
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop Ud≤ 1.5 V DC
Response time 2 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Measurement accuracy
Temperature drift 0.05 %/K
Warm up time 5 min
Repeat accuracy ≤ 1 %
Linearity error ± 1 %
Ambient conditions
Ambient temperature 10 ... 60 °C (50 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 13.9 mm
Housing height 41.4 mm
Housing depth 18.3 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 10 g
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
constantly on - switch output active
constantly off - switch output inactive
< 25 mA at 24 V supply voltage
0
Process data output 2 Bit
C/Q - Pin4: NPN normally open, PNP normally closed, IO-Link
Q2 - Pin2: NPN normally open, PNP normally closed
polarity protected, overvoltage protected
Accessories
V31-GM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
V31-WM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
IO-Link-Master02-USB
IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection
Other suitable accessories can be found at
Approvals and certificates
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2018-06-08 14:53 Date of issue: 2018-06-08 267075-100207_eng.xml
Loading...