Pepperl Fuchs OMT150-R103-2EP-IO Data Sheet
Distance sensor
Model Number
OMT150-R103-2EP-IO
Distance sensor
with fixed cable
Features
• Miniature design with versatile
mounting options
• Space-saving distance sensors in
small standardized design
• Multi Pixel Technology (MPT) - exact
and precise signal evaluation
• IO-link interface for service and
process data
Product information
The R103 series miniature optical sensors
are the first devices of their kind to offer an
end-to-end solution in a small single standard
design — from thru-beam sensor through to a
distance measurement device. As a result of
this design, the sensors are able to perform
practically all standard automation tasks.
The entire series enables sensors to
communicate via IO-Link.
The DuraBeam laser sensors are durable and
can be used in the same way as a standard
sensor.
The use of Multi Pixel Technology gives the
standard sensors a high level of flexibility and
enables them to adapt more effectively to
their operating environment.
Dimensions
24.1
L
100
6
4.2
Electrical connection
1
L+
4
C/Q
2
Q2
3
L-
Indicators/operating means
2
1
3
4
5
V
IV
Q2
I
Q1
IIIII
M18 x 1
10.2
26.7
OMT150-R103-2EP-IO
15
Receiver
8.5 13.6
Transmitter
ø 3.3 x 2
1 Teach-in button
2 Mode rotary switch
3 Switch output indicator Q2
4 Switch output indicator Q1
5 Operating indicator
I Switch output 1 / switch point B
II Switch output 1 / switch point A
III Switch output 2 / switch point A
IV Switch output 2 / switch point B
V Keylock
36.5
Release date: 2018-06-08 14:57 Date of issue: 2018-06-08 267075-100377_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Distance sensor
OMT150-R103-2EP-IO
Technical data
General specifications
Measurement range 60 ... 150 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Angle deviation max. +/- 1.5 °
Diameter of the light spot approx. 10 mm at a distance of 150 mm
Angle of divergence approx. 4 °
Ambient light limit EN 60947-5-2 : 30000 Lux
Resolution 0.1 mm
Functional safety related parameters
MTTFd 600 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green:
Function indicator LED yellow:
Control elements Teach-In key
Control elements 5-step rotary switch for operating modes selection
Electrical specifications
Operating voltage UB10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
Protection class III
Interface
Interface type IO-Link ( via C/Q = BK )
Device profile Smart Sensor
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 3 ms
Process data witdh Process data input 3 Byte
SIO mode support yes
Device ID 0x11090B (1116427)
Compatible master port type A
Output
Switching type The default setting is:
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop Ud≤ 1.5 V DC
Response time 2 ms
Conformity
Communication interface IEC 61131-9
Product standard EN 60947-5-2
Measurement accuracy
Temperature drift 0.05 %/K
Warm up time 5 min
Repeat accuracy ≤ 1 %
Linearity error ± 1 %
Ambient conditions
Ambient temperature 10 ... 60 °C (50 ... 140 °F) , fixed cable
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width 15 mm
Housing height 36.5 mm
Housing depth 26.7 mm
Degree of protection IP67 / IP69 / IP69K
Connection 2 m fixed cable
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 38 g
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode
constantly on - switch output active
constantly off - switch output inactive
< 25 mA at 24 V supply voltage
0
Process data output 2 Bit
C/Q - BK: NPN normally open, PNP normally closed, IO-Link
Q2 - WH: NPN normally open, PNP normally closed
polarity protected, overvoltage protected
10 ... 60 °C (50 ... 140 °F) , movable cable not appropriate for
conveyor chains
2
Accessories
V31-GM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
V31-WM-2M-PUR
Female cordset, M8, 4-pin, PUR cable
IO-Link-Master02-USB
IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection
OMH-R103-01
Mounting bracket
Other suitable accessories can be found at
Release date: 2018-06-08 14:57 Date of issue: 2018-06-08 267075-100377_eng.xml
Loading...