Pepperl Fuchs OIT500-F113-B12-CB3 Data Sheet
High temperature identification system OIT500-F113-B12-CB3
Function
The OIT* stationary read device is an optical identification system that works using industrial
vision methods and is used in automated manufacturing processes. The ambient conditions in
automobile construction in particular, for example the cyclical temperature changes, often
make the use of read-only tags with electronic components difficult if not impossible.
For the OIT high-temperature identification system, read-only tags of solid metal plates with a
perforated matrix are used, which are designed for use at temperatures of up to 500 °C and
suitable for high mechanical stress.
Simple installation and commissioning without complicated, time-consuming Teach-In processes enable rapid entry. Pluggable connections for the rapid exchange of devices and a controller with simple command set via the Ethernet interface guarantee simple operation. A
scratch-resistant, replaceable quartz glass panel and sturdy metal housing make the OIT* a
robust, efficient identification system.
Indicating / Operating means
1 Grounding screw
2 Power supply
3 Network
4 Trigger
5 external illumination
4-pin M12 socket
(external illumination)
1
1
2
4
4
Pin Signal
1 24 V power supply
2 not connected
3 Ground
4 Illumination control
2
3
3
Model Number
OIT500-F113-B12-CB3
Optical high temperature identification
system, 350 to 400 mm
Features
• High-temperature code carrier up to
500 °C (932 °F)
• Sturdy and compact design
• Integrated illumination
• High operating range
• Large sensing range
• High depth of focus
1
2
Electrical connection
8-pin Network connection
(LAN)
8
7
6
5
4
3
2
1
Pin Signal
1 Transmit data (+)
2 Transmit data (-)
3 Receive data (+)
4 not assigned
5 not assigned
6 Receive data (-)
7 not assigned
8 not assigned
3
4
5
Release date: 2018-02-02 07:56 Date of issue: 2018-02-02 274807_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
8-pin Harting connection
(Process)
1
Pin Signal
1 not connected
2 External ground
3 not connected
4 not connected
5 24 V external power supply
6 24 V device power supply
7 not connected
8 Device ground
8
23
7
654
Technical data
General specifications
Light source Integrated LED lightning
Light type infrared
4-pin M12 socket
(Trigger)
1
4
Pin Signal
1 24 V power supply
2 not connected
3 Ground
4 Trigger signal
2
3
1
OIT500-F113-B12-CB3High temperature identification system
Symbologies CB1: perforated matrix 6 x 6 6 decimal digits
Read distance 350 ... 400 mm
Reading field 320 mm x 200 mm at max. read distance
Evaluation frequency 5 Hz
Ta rge t v el oc ity triggered ≤ 0.5 m/s
Functional safety related parameters
MTTFd 51 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: supply
Function indicator Yellow LED: trigger
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
Operating current I
Interface
Physical Ethernet
Protocol TCP/IP
Tran sf er ra te 100 MBit/s
Output
Number/Type 1 conventional electronic output, PNP
Switching voltage 24 V ± 15 % PELV
Switching current 100 mA each output
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP64
Connection 8-pin Harting HAN
) 10 a
M
CB3: hole pattern 3 x 12 12 binary digits
LED green: ready
Yellow LED: code read
Red LED: pre-fault
Red LED: group error
250 mA without output drivers
B
RJ-45
2 x 5-pin M12 socket
Accessories
OIC-C10V2A-CB1
Code carrier for optical high-temperature
identification system, stainless steel
V8HAN-G-10M-PVC-ABG
Female cordset, Harting, 8-pin, shielded,
PVC cable
V45-GP-10M-PUR-ABG-V45-G
Connecting cable, RJ-45 to RJ-45, PUR
cable
V45-GP
Field-attachable "Push-Pull" connector
V45-G
Field-attachable male connector
V1S-G-10M-PVC
Cable connector, M12, 4-pin, PVC cable
V8HAN-G
Female connector, Harting, 8-pin, field attachable
OIZ-FG500
Replacement glass for series OIT300,
OIT500 and OIT1500
Vision Configurator
Operating software for camera-based
sensors
ries can be found at
Material
Housing diecast aluminum powder coated
Mass approx. 4000 g
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 61326-1:2013 , EN 61000-6-4:2007/A1:2011
Standard conformity
Noise immunity EN 61326-1:2013
Emitted interference EN 61000-6-4:2007/A1:2011
Degree of protection EN 60529
Approvals and certificates
EAC conformity TR CU 020/2011
Release date: 2018-02-02 07:56 Date of issue: 2018-02-02 274807_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...