Pepperl Fuchs OIT300-F113-B12-CB2 Data Sheet
High temperature identification system OIT300-F113-B12-CB2
Function
The stationary scanner OIT300-F113-B12-CB2 is an optical identification system using the
methods of industrial image processing, which finds application in automated manufacturing
processes.
For this reason, the high-temperature identification system OIT is fitted with code carriers with
massive metal plates provided with a perforated matrix, which can withstand temperatures up
to 500 °C and high mechanical loads.
Simple installation as well as commissioning without complicated and long-winded TEACH-IN
enable fast application. Plug-in connections for fast exchange of devices and the control with
simple command sets through an Ethernet interface ensure very easy operation. A scratch
resistant quartz glass pane, which can be replaced, if and when required, as well as the stable
metal housing turn the OIT300-F113-B12-CB2 into a robust and powerful identification system.
Indicating / Operating means
1 Grounding screw
2 Power supply
3 Network
4 Trigger
5 external illumination
4-pin M12 socket
(external illumination)
1
1
2
4
4
Pin Signal
1 24 V power supply
2 Laser control
3 Ground
4 Illumination control
2
3
3
Model Number
OIT300-F113-B12-CB2
Optical high temperature identification
system, 100 to 270 mm
Features
• High-temperature code carrier up to
500 °C (932 °F)
• Sturdy and compact design
• Integrated illumination
• Large sensing range
• High depth of focus
1
2
Electrical connection
8-pin Network connection
(LAN)
8
7
6
5
4
3
2
1
Pin Signal
1 Transmit data (+)
2 Transmit data (-)
3 Receive data (+)
4 not assigned
5 not assigned
6 Receive data (-)
7 not assigned
8 not assigned
3
4
5
Release date: 2016-06-14 15:45 Date of issue: 2016-06-14 211114_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
8-pin Harting connection
(Process)
1
Pin Signal
1 Composite error output
2 External ground
3 Mode bit 1
4 Mode bit 0
5 24 V external power supply
6 24 V device power supply
7 Trigger release input
8 Device ground
8
23
7
654
Technical data
General specifications
Light source Integrated LED lightning
Light type infrared
4-pin M12 socket
(Trigger)
1
4
Pin Signal
1 24 V power supply
2 not assigned
3 Ground
4 Trigger signal
2
3
1
OIT300-F113-B12-CB2High temperature identification system
Symbologies Hole matrix
Read distance adjustable 100 ... 270 mm
Depth of focus ± 50 mm
Reading field 210 mm x 160 mm at max. read distance
Evaluation frequency 5 Hz
Target velocity triggered ≤ 0.5 m/s
Functional safety related parameters
MTTFd 51 a
Mission Time (TM) 10 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: supply
Function indicator Yellow LED: trigger
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
Operating current I
Interface
Physical Ethernet
Protocol TCP/ IP
Transfer rate 100 MBit/s
Input
Input voltage to be applied externally 24 V ± 15% PELV
Number/Type 1 trigger input 2 control unit inputs , optically decoupled
Input current approx. 1 mA at 24 V DC
Output
Number/Type 1 electronic output, PNP, optically decoupled
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection IP64
Connection 8-pin Harting HAN
Material
Housing diecast aluminum powder coated
Mass approx. 4000 g
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 61326-1 , EN 61000-6-4
Standard conformity
Noise immunity EN 61326-1
Emitted interference EN 61000-6-4:2007/A1:2011
Degree of protection EN 60529
Value range: 4-digit numerical,
between 1 and 4095
Code carrier size: 80 mm x 36 mm
LED green: ready
Yellow LED: code read
Red LED: pre-fault
Red LED: group error
250 mA without output drivers
B
RJ-45
2 x 5-pin M12 socket
Supplied ferrite sleeve for suppression of the Ethernet cable
Accessories
OIC-C11V4A-CB2
Code carrier for optical high-temperature
identification system, stainless steel
V8HAN-G-10M-PVC-ABG
Female cordset, Harting, 8-pin, shielded,
PVC cable
V45-GP-10M-PUR-ABG-V45-G
Connecting cable, RJ-45 to RJ-45, PUR
cable
V45-GP
Field-attachable "Push-Pull" connector
V45-G
Field-attachable male connector
V1S-G-10M-PVC
Cable connector, M12, 4-pin, PVC cable
V8HAN-G
Female connector, Harting, 8-pin, field attachable
OITControl
Software for OIT high temperature identification system
OIZ-FG500
Replacement glass for series OIT300,
OIT500 and OIT1500
Other suitable accessories can be found at
Approvals and certificates
EAC conformity TR CU 020/2011
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Release date: 2016-06-14 15:45 Date of issue: 2016-06-14 211114_eng.xml
Loading...