Pepperl+Fuchs OHV1000-series Quick Start Manual

OHV1000-*

Handheld

FACTORY AUTOMATION

QUICK START GUIDE

With regard to the supply of products, the current issue of the following document is applicable: The

General Terms of Delivery for Products and Services of the Electrical Industry, published by the

Central Association of the Electrical Industry (Zentralverband Elektrotechnik und Elektroindustrie

(ZVEI) e.V.) in its most recent version as well as the supplementary clause: "Expanded reservation

of proprietorship"

OHV1000-*

OHV1000-*

Contents

2014-10

3

1 Introduction .......................................................................4

1.1 Purpose of this quick start guide ................................................................ 4

1.2 Intended Use.............................................................................................. 4

1.3 Operation, Maintenance, Repair................................................................. 5

1.4 Delivery, Transport, Disposal...................................................................... 5

2 Product Description..........................................................6

2.1 Indicators and Operating Controls.............................................................. 6

2.2 Accessories................................................................................................ 7

3 Installation .........................................................................8

3.1 Installing/Removing the Cable.................................................................... 8

3.2 Establishing a USB Connection ................................................................. 9

3.3 Establishing an RS232 Connection............................................................ 9

4 Operation .........................................................................11

4.1 Reading Codes ........................................................................................ 11

4.2 Keyboard Mode........................................................................................ 13

OHV1000-*

Introduction

4

2014-10

1Introduction

1.1 Purpose of this quick start guide

This quick start guide contains basic instructions for operating the device.
However, the manual takes priority over the quick start guide.

1.2 Intended Use

The handheld is used to identify 1-D and 2-D codes that have been applied
directly to the surface of a product. For example, the code may have been etched,
printed, or laser-engraved on a housing. The degree of flexibility offered when
decoding codes allows the handheld to be used in a number of industries.

Always operate the device as described in these instructions to ensure that the
device and connected systems function correctly. The protection of operating
personnel and plant is only guaranteed if the device is operated in accordance
with its intended use.

OHV1000-*

Introduction

2014-10

5

1.3 Operation, Maintenance, Repair

The handheld has bright LEDs to enable it to read 1-D and 2-D codes. The optical
light can be an irritant, especially in a dark environment. Do not point the handheld
at people. Do not look directly into the handheld's lens.

The device must not be repaired, changed or manipulated.

If there is a defect, the product must be returned to the manufacturer
Pepperl+Fuchs.

1.4 Delivery, Transport, Disposal

Check the packaging and contents for damage.

Check if you have received every item and if the items received are the ones you
ordered.

Keep the original packaging. Always store and transport the device in the original
packaging.

Store the device in a clean and dry environment. The permitted ambient
conditions (see datasheet) must be considered.

Disposing of device, packaging material, and possibly contained batteries must
be in compliance with the applicable laws and guidelines of the respective
country.