Pepperl Fuchs ODT-MAC401-ND-WH-5601 Data Sheet
Stationary read device ODT-MAC401-ND-WH-5601
Function
The stationary reader is a reading system for the recognition of data matrix codes.
With a powerful signal processor and optimized decoding algorithms, the device delivers delivers extremely high reading speeds.
The configuration is easy and comfortable via the standard Ethernet interface using a standard
web browser or via serial port.
The device is supported by an integrated laser pointer and the VGA video output. In addition,
the device has an integrated error image memory.
Typical operative range of stationary readers are:
- Document handling
- Printing machines
- Identification in packaging and warehousing technology
- Detection of PCBs
Indicating / Operating means
Model Number
ODT-MAC401-ND-WH-5601
Stationary high-speed read device for
code speeds up to 20 m/s and 60 fps,
Data Matrix ECC 200 Code, angled line
of sight, VGA resolution, Ethernet, RS
232
Features
• Up to 60 readings per second
• Movement speeds of up to 20 m/s
• Omni-directional reading
• Evaluation of up to 256 gray values
with adaptive gray value threshold
•VGA output
• Integrated error image memory
4
VGA
VCC/I-O/RS232
Electrical connection
VGA
Pin Signal
1 OUT VSYNC
2 GND
3 OUT R
4 OUT G
5 GND
6 OUT B
7 OUT HSYNC
VCC/I-O/RS232
1
7
6
LAN
TCP/I P
ST
2
3
4
5
1
1 Socket LAN
2 Socket VGA
2
3
LAN
8
1
3 Plug 24VDC + IO
4 Status LED yellow/red/green
8
1
Pin Signal
1 TX+ Ethernet
2 TX- Ethernet
3 RX+ Ethernet
4 NC
5 NC
6 RX- Ethernet
7 NC
8 NC
Release date: 2012-10-29 16:48 Date of issue: 2013-09-03 247892_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Pin Signal
1 GND
2 GND
3 GND IO
4 +UB
5 +UB
6 +UB IO
7 NC
8 IN 2
15
9
Pin Signal
9 Good
10 Bad
11 Trigger
12 NC
13 TX RS232
14 RX RS232
15 IN 3
1
ODT-MAC401-ND-WH-5601Stationary read devic e
Technical data
General specifications
Light type Integrated LED lightning (white)
Symbologies Data Matrix ECC 200
Read distance 60 mm
Depth of focus ± 5 mm
Reading field 30 mm x 20 mm
Modul size ≥ 0.2 mm
Sensor principle Camera system
Evaluation frequency max. 60 Hz
Ta rge t v el oc ity triggered ≤ 20 m/s
Data Matrix
Symbol size rectangular up to 48 x 48 modules
Data format ASCII, C40, Text, X12, Edifact, Base 256 , all according to
Data capacity 348 numerical, 259 ASCII, 172 Byte
Orientation omnidirectional
Nominal ratings
Camera
Ty p e CMOS , Global shutter
Number of pixels 752 x 480 pixels
Gray scale 256
Image recording real-time , Program-controlled or triggered externally
Indicators/operating means
LED indicator for good/poor reading
Electrical specifications
Operating voltage UB24 V DC ± 15% , PELV
No-load supply current I
Power consumption P
Interface
Physical RS 232
Protocol ASCII
Transfer rate 9600 ... 115200 Bit/s
Cable length max. 30 m
Output
Number/Type 2 electronic outputs, PNP , optically decoupled
Switching voltage to be applied externally 24 V ± 15 % PELV
Switching current 100 mA each output
Cable length max. 30 m
Output 1
Output type Video output, RGB (75 Ohm), 1 Vpp
Resolution VGA, 800 x 600 pixels
Ambient conditions
Ambient temperature 0 ... 45 °C (32 ... 113 °F)
Storage temperature -20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Protection degree IP20
Connection Video: 7-pin socket
Material
Housing powder coated diecast zinc
Mass approx. 760 g
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 61326-1 , EN 61000-6-4
Standard conformity
Noise immunity EN 61326-1
Emitted interference EN 61000-6-4
Protection degree EN 60529
rectangular up to 16 x 48 modules
ISO 646
max. 250 mA
0
6 W
0
optional up to 4 outputs
Power supply/interfaces/inputs and outputs: Sub-D 15-pin UNC
LAN : RJ-45 socket, 8-pin
Accessories
ODZ-MAC-CAB-VIDEO
Video cable VGA
ODZ-MAC-CAB-15POL-2,5M-FEMALE
Connecting cable Sub-D jack, 15-pin
V45-G-10M-V45-G
Network cable RJ-45, Category 5
ODZ-TRIGGERBOX-SK
Trigger box for fixed mounted readers
ODZ-MAC-CAB-15POL-5M-FEMALE
Connecting cable Sub-D jack, 15-pin
ODZ-MAC-PWR-24V
24 V DC power supply
ODZ-MAC-CAB-24V-R2-2M
Connecting cable for power
supply/RS 232
Other suitable accessories can be found at
Release date: 2012-10-29 16:48 Date of issue: 2013-09-03 247892_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...