PEPPERL+FUCHS OBD1100-R100-IR2 Datasheet

Diffuse mode sensor

Dimensions

OBD1100-R100-2EP-IO-IR

21.5

8.7

5.5

14.5

11

M3 (2x) 3.2

Model Number

OBD1100-R100-2EP-IO-IR

Diffuse mode sensor

with fixed cable

Features

• Miniature design with versatile
mounting options

• Extended temperature range

-40°C ... 60°C

• High degree of protection IP69K

• IO-link interface for service and
process data

• Infrared light design

Product information

37.1

3.3

2000 +50

100

6

4.2

Electrical connection

BN

L+

BK

C/Q

WH

BU

Q

L-

Indicators/operating means

2

1

3

4

5

25.4

Receiver

Emitter

19.95

Receiver

Emitter

14.2

15.9

10

7.4

ø 3.2

1 Light-on/Dark-on changeover switch

2 Sensitivity adjuster

3 Operating indicator / dark on

4 Signal indicator

5 Operating indicator / light on

The miniature optical sensors are the first
devices of their kind to offer an end-to- end
solution in a small single standard design —
from thru-beam sensor through to a distance
measurement device. As a result of this
design, the sensors are able to perform
practically all standard automation tasks.

The DuraBeam laser sensors are durable
and can be used in the same way as a
standard sensor.

The use of Multi Pixel Technology gives the
standard sensors a high level of flex ibility and
enables them to adapt more effectively to
their operating environment.

Release date: 2019-07-15 17:34 Date of issue: 2019-07-15 267075-100432_eng.xml

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

www.pepperl-fuchs.com [e-mail] [e-mail]

USA: [phone] Singapore: [phone]

Germany: [phone]Pepperl+Fuchs Group

[e-mail]

1

Diffuse mode sensor

OBD1100-R100-2EP-IO-IR

Technical data

General specifications

Detection range 2 ... 1100 mm
Detection range min. 10 ... 60 mm
Adjustment range 60 ... 1100 mm
Reference target standard white, 100 mm x 100 mm
Light source LED
Light type modulated infrared light 850 nm
LED risk group labelling exempt group
Diameter of the light spot approx. 100 mm at a distance of 1000 mm
Angle of divergence 5.4 °
Ambient light limit EN 60947-5-2

Functional safety related parameters

MTTFd 724 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %

Indicators/operating means

Operation indicator LED green:

Function indicator LED yellow:

Control elements Light-on/dark-on changeover switch
Control elements Sensing range adjuster

Electrical specifications

Operating voltage UB10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
Protection class III

Interface

Interface type IO-Link ( via C/Q = BK )
Transfer rate COM 2 (38.4 kBaud)
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data witdh Process data input 1 Bit

SIO mode support yes
Device ID 0x110101 (1114369)
Compatible master port type A

Output

Switching type The switching type of the sensor is adjustable. The default

Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse

Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Usage category DC-12 and DC-13
Voltage drop U
Switching frequency f 1000 Hz
Response time 0.5 ms

Conformity

Communication interface IEC 61131-9
Product standard EN 60947-5-2

Ambient conditions

Ambient temperature -40 ... 60 °C (-40 ... 140 °F) , fixed cable

Storage temperature -40 ... 70 °C (-40 ... 158 °F)

Mechanical specifications

Housing width 11 mm
Housing height 37.1 mm
Housing depth 21.5 mm
Degree of protection IP67 / IP69 / IP69K
Connection 2 m fixed cable
Material

Housing PC (Polycarbonate)

Optical face PMMA
Mass approx. 10 g
Cable length 2 m

constantly on - power on
flashing (4Hz) - short circuit
flashing with short break (1 Hz) - IO-Link mode

constantly on - object detected
constantly off - object not detected

< 25 mA at 24 V supply voltage

0

Process data output 2 Bit

setting is:
C/Q - BK: NPN normally open / light-on, PNP normally closed /
dark-on, IO-Link
/Q - WH: NPN normally closed / dark-on, PNP normally open /
light-on

polarity protected, overvoltage protected

≤ 1.5 V DC

d

-25 ... 60 °C (-13 ... 140 °F) , movable cable not appropriate for
conveyor chains

Accessories

IO-Link-Master02-USB

IO-Link master, supply via USB port or
separate power supply, LED indicators,
M12 plug for sensor connection

OMH-R10X-01

Mounting bracket

OMH-R10X-02

Mounting bracket

OMH-R10X-04

Mounting bracket

OMH-R10X-10

Mounting bracket

OMH-ML100-03

Mounting aid for round steel ø 12 mm or
sheet 1.5 mm ... 3 mm

OMH-ML100-031

Mounting aid for round steel
ø 10 ... 14 mm or sheet 1 mm ... 5 mm

Other suitable accessories can be found at
www.pepperl-fuchs.com

Approvals and certificates

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

2

www.pepperl-fuchs.com [e-mail] [e-mail]

USA: [phone] Singapore: [phone]

Germany: [phone]Pepperl+Fuchs Group

[e-mail]

Release date: 2019-07-15 17:34 Date of issue: 2019-07-15 267075-100432_eng.xml

Diffuse mode sensor

UL approval E87056 , cULus Listed , class 2 power supply , type rating 1

Curves/Diagrams

Characteristic response curve

Offset Y [mm]

15

10

5

0

-5

-10

-15
0 200 400 600 800 1000

X

Y

white 90 %

grey 18 %

Relative received light strength

Excess gain

1000

Distance X [mm]

OBD1100-R100-2EP-IO-IR

100

10

1

0 200 400 600 800 1000 1200

X

white 90 %

Detection ranges

Object colour

white
90%

grey

18%

black

6%

0 200 400 600 800 1000 1200

Detection range [mm]

X

Distance X [mm]

Release date: 2019-07-15 17:34 Date of issue: 2019-07-15 267075-100432_eng.xml

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

www.pepperl-fuchs.com [e-mail] [e-mail]

USA: [phone] Singapore: [phone]

Germany: [phone]Pepperl+Fuchs Group

[e-mail]

3

Diffuse mode sensor

Functions and Operation

OBD1100-R100-2EP-IO-IR

1 - Light-on / dark-on changeover switch

2 - Sensing range / sensitivity adjuster

3 - Operating indicator / dark on

4 - Signal indicator

5 - Operating indicator / light on

R100

5

1

4

2

LD

3

To unlock the adjustment functions turn the sensing range /sensitivity adjuster for more than 180 degrees.

Sensing Range / Sensitivity

Turn sensing range / sensitivity adjuster clockwise to increase sensing range / sensitivity.

Turn sensing range / sensitivity adjuster counter clockwise to decrease sensing range / sensitivity.

If the end of the adjustment range is reached, the signal indicator starts flashing with 8 Hz.

Light-on / Dark-on Configuration

Press the light-on / dark-on changeover switch for more than 1 second (less than 4 seconds). The light-on / dark-on mode chang­es and the operating indicators are activated accordingly.

If you press the light-on / dark-on changeover switch for more than 4 seconds, the light-on /dark-on mode changes back to the
original setting. On release of the light-on / dark-on changeover switch the current state is activated.

Restore Factory Settings

Press the light-on / dark-on changeover switch for more than 10 seconds (less than 30 seconds) until all LEDs turn off. On release
of the light-on / dark-on changeover switch the signal indicator turns on. After 5 seconds the sensor resumes operation with
factory default settings.

After 5 minutes of inactivity the sensing range / sensitivity adjustment is locked. In order to reactivate the sensing range / sensi­tivity adjustment, turn the sensing range /sensitivity adjuster for more than 180 degrees.

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

4

www.pepperl-fuchs.com [e-mail] [e-mail]

USA: [phone] Singapore: [phone]

Germany: [phone]Pepperl+Fuchs Group

[e-mail]

Release date: 2019-07-15 17:34 Date of issue: 2019-07-15 267075-100432_eng.xml