Pepperl Fuchs NRN40-U1-E2-V1 Data Sheet
Inductive sensor NRN40-U1-E2-V1
Technical Data
General specifications
Switching element function PNP NO
Model Number
NRN40-U1-E2-V1
Features
• Sensor head bidirectional and rotatable
• 40 mm non-flush
• Reduction factor = 1
• 4 LEDs indicator for 360° visibility
• Magnetic field resistant
Accessories
V1-W
Female connector, M12, 4-pin, field attachable
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
MHW 01
Modular mounting bracket
MH 04-2681F
Mounting aid for VariKont, +U1+ and +U9*
V1-G
Female connector, M12, 4-pin, field attachable
Rated operating distance s
Installation non-flush
Output polarity switched high
Assured operating distance sa0 ... 32.4 mm
Reduction factor r
Reduction factor rCu 1
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 30 V
Switching frequency f 0 ... 100 Hz
Hysteresis H 2 ... 15 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop U
Operating current I
Off-state current I
No-load supply current I
Time delay before availability t
Constant magnetic field B 200 mT
Alternating magnetic field B 200 mT
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 1002 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 4-pin
Housing material PA/metal with epoxy powder coating
Sensing face PA 6 Grivory GVN-35H
Housing base plastic
Degree of protection IP67
Mass 225 g
Note Tightening torque: 1.8 Nm (housing)
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
Protection class II
Rated insulation voltage U
Design-impulse-voltage withstan d U
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
1
Al
1
304
1
St37
Dimensions
40 mm
n
≤ 2.5 V
d
0 ... 200 mA
L
0 ... 0.5 mA typ. 0.01 mA
r
≤ 25 mA
0
80 ms
v
Tightening torque: 1.0 Nm (Screw terminal)
EN 60947-5-2:2007
IEC 60947-5-2:2007
60 V
i
800 V
imp
Release date: 2014-06-25 13:49 Date of issue: 2014-06-25 217328_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
LED ye
LED gn
LED gn
LED ye
118
M12 x 1
40
6046
14
5.3
30
40
1
Inductive sensor NRN40-U1-E2-V1
Electrical Connection
Pinout
1
4
3
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
2
L+
L-
1
4
3
(brown)
(white)
(blue)
(black)
Release date: 2014-06-25 13:49 Date of issue: 2014-06-25 217328_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...