Pepperl Fuchs NJ5-18GM50-E2-V1 Data Sheet

Inductive sensor NJ5-18GM50-E2-V1
Technical Data
General specifications
Switching function Normally open (NO) Output type PNP Rated operating distance sn5 mm Installation flush Output polarity DC
Model Number
NJ5-18GM50-E2-V1
Features
•5 mm flush
Accessories
BF 18
Mounting flange, 18 mm
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable
EXG-18
Quick mounting bracket with dead stop
V1-G
Female connector, M12, 4-pin, field attachable
V1-W
Female connector, M12, 4-pin, field attachable
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
Assured operating distance s Actual operating distance sr4.5 ... 5.5 mm typ. 5 mm Reduction factor r Reduction factor rCu 0.15 Reduction factor r Reduction factor r Output type 3-wire
Nominal ratings
Operating voltage UB10 ... 60 V Switching frequency f 0 ... 1500 Hz Hysteresis H 1 ... 10 typ. 6 % Reverse polarity protection reverse polarity protected
S
Short-circuit protection pulsing Vol tag e d rop Ud≤ 3 V Vol tag e d rop at I
Vol tage dro p IL = 100 mA, switching ele-
ment on U Operating current I Lowest operating current I Off-state current I
Off-state current TU =40 °C, switching ele-
ment off No-load supply current I Time delay before availability t Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 750 a Mission Time (TM) 20 a Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 3-pin Housing material Stainless steel 1.4305 / AISI 303 Sensing face PBT Degree of protection IP67
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval Certified by China Compulsory Certification (CCC)
0.2
Al
0.62
304
0.32
Brass
L
d
0 ... 4.05 mm
a
1.5 ... 2.5 V typ. 1.9 V
0 ... 200 mA
L
0 mA
m
0 ... 0.5 mA typ. 0.01 mA
r
100 µA
9 mA
0
30 ms
v
EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012
Dimensions
M18 x 1
4
24
LED
50
65
6
M12 x 1
Release date: 2017-01-20 10:48 Date of issue: 2017-01-20 282958_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Inductive sensor NJ5-18GM50-E2-V1
Electrical Connection
Pinout
1
4
3
Wire colors in accordance with EN 60947-5-2
1 BN 2 WH 3 BU 4 BK
2
L+
L-
1
4
3
(brown) (white) (blue) (black)
Release date: 2017-01-20 10:48 Date of issue: 2017-01-20 282958_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...