
Inductive sensor NJ50-FP-E-P1
Technical Data
General specifications
Switching element function NPN NO
Model Number
NJ50-FP-E-P1
Features
•Comfort series
• 50 mm non-flush
Rated operating distance s
Installation non-flush
Output polarity DC
Assured operating distance sa0 ... 40.5 mm
Reduction factor r
Reduction factor rCu 0.3
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 30 V
Switching frequency f 0 ... 100 Hz
Hysteresis H typ. 3 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop Ud≤ 3 V
Operating current I
Off-state current I
No-load supply current I
Time delay before availability t
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
Core cross-section up to 2.5 mm
Minimum core cross-section
Maximum core cross-section
Housing material PBT
Sensing face PBT
Housing base PBT
Degree of protection IP67
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
0.4
Al
0.85
304
50 mm
n
0 ... 200 mA
L
0 ... 0.5 mA typ. 0.1 µA at 25 °C
r
≤ 20 mA
0
≤ 30 ms
v
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
without wire end ferrule 0.5 mm
without wire end ferrule 2.5 mm2 , with connector sleeves 1.5 mm
EN 60947-5-2:2007
IEC 60947-5-2:2007
2
2
, with connector sleeves 0.34 mm
2
2
Dimensions
40
11
80
65
ø 9.5
LED
M20 x 1.5
7
ø 5.3
65
Release date: 2016-09-29 11:43 Date of issue: 2016-10-10 017588_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1

Inductive sensor NJ50-FP-E-P1
Electrical Connection
BN
BK
BU
L+
L-
Release date: 2016-09-29 11:43 Date of issue: 2016-10-10 017588_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2