Pepperl Fuchs NJ2-F-E02-1.025-V1 Data Sheet
Inductive sensor NJ2-F-E02-1.025-V1
Dimensions
LEDs
Ø48
35
2 x
Ø6.5
38
Ø25
Model Number
NJ2-F-E02-1.025-V1
Cylinder Position Switch
M12 x 1
34.5
26.5
7
"X"
Features
•4-wire DC
• Weld Immune
• Sensing range 2 mm
•1000 psi rating
Connection
1
4
2
3
L+
L-
Pinout
1
2
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
(brown)
(white)
(blue)
(black)
4
3
Ø11.5
Technical Data
General specifications
Switching element function NPN & PNP, NO
Rated operating distance s
Installation flush
Output polarity switched high and switched low
Assured operating distance sa0 ... 1.62 mm
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 30 V DC
Switching frequency f 0 ... 30 Hz
Hysteresis H 10 ... 20 typ. 15 %
Reverse polarity protected yes
Short-circuit protection yes
Voltage drop U
Operating current I
Off-state current I
No-load supply current I
Mag. Field strength, AC fields 250 mT
Mag. Field strength, DC fields 100 mT
Limit data
Operating pressure dynamically 1000 psi
Indicators/operating means
LED green Power on
LED yellow Output status
Standard conformity
Standards EN 60947-5-2
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Device connector M12 x 1 , 4-pin
Protection degree IP67
Material Housing: zinc
Note X = 1.025 in (26 mm)
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
0.4
Al
0.85
304
2 mm
n
≤ 2 V DC
d
≤ 200 mA
L
≤ 100 µA
r
0
≤ 35 mA
Probe: aluminum
Accessories
V1-G-2M-PVC
Cable socket, M12, 4-pin, PVC cable
V1-W-2M-PVC
Cable socket, M12, 4-pin, PVC cable
V1-G-2M-PUR H/S
Female cordset, M12, 4-pin, irradiated PUR cable
V1-W-2M-PUR H/S
Female cordset, M12, 4-pin, irradiated PUR cable
SPACER 0.160 TO 0.375 : X.XXX"
Release date: 2012-05-03 15:32 Date of issue: 2012-05-03 904474_eng.xml
Spacer for cylinder switches
Subject to modifications without notice
Pepperl+Fuchs Group
Copyright Pepperl+Fuchs
1
Inductive sensor NJ2-F-E02-1.025-V1
NPT Type Mounting Holes:
1000 and 3000 psi NPT Types:
Mounting hole screw thread
shall be 1/4" - 20.
Minimum thread engagement
depth is 0.250" (6.35 mm)
Hole spacing is 35 mm
center to center.
Mounting Screws:
Standard 1000 and 3000 psi
models use two, self-locking 1/4"- 20 socket head cap
screws (provided).
Recommended tightening torque: 150 in lb (16.95 N-m).
Important: When using spacers, make
certain to maintain the 0.250" (6.35 mm) minimum
mounting screw thread engagement.
Sensor through-hole
Cylinder End-Cap Overhead View
Mounting
hole spacing
Mounting hole (x2)
Release date: 2012-05-03 15:32 Date of issue: 2012-05-03 904474_eng.xml
Subject to modifications without notice
2
Pepperl+Fuchs Group
Copyright Pepperl+Fuchs
Loading...