Pepperl Fuchs NJ2-FD-E02-1.875-V1 Data Sheet

Inductive sensor NJ2-FD-E02-1.875-V1

Dimensions

LEDs

Ø56

40

2 x

Ø6.5

37.5

Ø25

Model Number

NJ2-FD-E02-1.875-V1

Cylinder Position Switch

M12 x 1

34.5

26.5

11

Features

•4-wire DC

• Weld Immune

• Sensing range 2 mm

•5000 psi rating

Connection

1

4

2

3

L+

L-

Pinout

1

2

3

Wire colors in accordance with EN 60947-5-2

1 BN
2 WH
3 BU
4 BK

Accessories

V1-G-2M-PVC

Cable connector

V1-W-2M-PVC

Cable connector

V1-G-2M-PUR H/S

Cable connector

V1-W-2M-PUR H/S

Cable connector

Release date: 2010-05-14 20:10 Date of issue: 2010-05-14 904484_ENG.xml

Subject to modifications without notice

"X"

Ø12.7

Technical Data

General specifications

Switching element function NPN & PNP, NO
Rated operating distance s
Installation embeddable
Output polarity DC NO
Assured operating distance sa0 ... 1.62 mm
Reduction factor r
Reduction factor r

Nominal ratings

Operating voltage UB10 ... 30 V DC
Switching frequency f 0 ... 30 Hz
Hysteresis H 10 ... 20 typ. 15 %
Reverse polarity protected yes
Short-circuit protection yes

4

Voltage drop U

Operating current I
Off-state current I

No-load supply current I

Mag. Field strength, AC fields 250 mT
Mag. Field strength, DC fields 100 mT

Limit data

Operating pressure dynamically 5000 psi

Indicators/operating means

LED green Power on
LED yellow Output status

Standard conformity

Standards EN 60947-5-2

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)

Mechanical specifications

Connection type V1 socket connector (M12 x 1)
Protection degree IP67
Material Housing: zinc

Note X = 1.875 in (47.6 mm)

Approvals and certificates

UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose

0.4

Al

0.85

V2A

Copyright Pepperl+Fuchs

2 mm

n

d

≤ 2 V DC
≤ 200 mA

L
r

≤ 100 µA

0

≤ 35 mA

Probe: stainless steel

1

Inductive sensor NJ2-FD-E02-1.875-V1

NPT Type Mounting Holes:

1000 and 3000 psi NPT Types:
Mounting hole screw thread
shall be 1/4" - 20.
Minimum thread engagement
depth is 0.250" (6.35 mm)
Hole spacing is 35 mm
center to center.

Mounting Screws:
Standard 1000 and 3000 psi
models use two, self-locking 1/4"- 20 socket head cap
screws (provided).
Recommended tightening torque: 150 in lb (16.95 N-m).

Important: When using spacers, make
certain to maintain the 0.250" (6.35 mm) minimum
mounting screw thread engagement.

NPT Type Mounting Holes:
1000 and 3000 psi NPT Types:
Mounting hole screw thread
shall be 1/4" - 20.
Minimum thread engagement
depth is 0.250" (6.35 mm)
Hole spacing is 35 mm
center to center.

Mounting Screws:
Standard 1000 and 3000 psi
models use two, self-locking 1/4"- 20 socket head cap
screws (provided).
Recommended tightening torque: 150 in lb (16.95 N-m).

Important: When using spacers, make
certain to maintain the 0.250" (6.35 mm) minimum
mounting screw thread engagement.

Sensor through-hole

Cylinder End-Cap Overhead View

Sensor through-hole

Cylinder End-Cap Overhead View

Mounting

hole spacing

Mounting

hole spacing

Mounting hole (x2)

Mounting hole (x2)

Release date: 2010-05-14 20:10 Date of issue: 2010-05-14 904484_ENG.xml

Subject to modifications without notice

Copyright Pepperl+Fuchs

2