Pepperl Fuchs NJ2-D-US-1.500-V93 Data Sheet

Inductive sensor NJ2-D-US-1.500-V93

Technical Data

General specifications

Switching element function AC/DC NO

Model Number

NJ2-D-US-1.500-V93

Cylinder Position Switch

Features

•2-wire AC/DC

• Weld Immune

• Sensing range 2 mm

• 3000 psi rating

Accessories

V93-G-YE2M-STOOW

Female cordset, 7/8" - 16 UNF, 3-pin, PUR cable

SPACER 0.160 TO 0.375 : X.XXX"

Spacer for cylinder switches

SPACER 0.380 TO 0.875 : X.XXX"

Spacer for cylinder switches

Rated operating distance s Installation flush Output polarity AC/DC NO Assured operating distance sa0 ... 1.62 mm Reduction factor r Reduction factor r

Nominal ratings

Operating voltage UB20 ... 250 V AC/20 ... 300 V DC Switching frequency f 0 ... 20 Hz Hysteresis H 10 ... 20 % 15 typ. Reverse polarity protection yes Short-circuit protection yes Vol tag e d rop U

Momentary current (20 ms, 0.1 Hz) Operating current I Off-state current I

Mag. Field strength, AC fields 250 mT Mag. Field strength, DC fields 100 mT

Limit data

Operating pressure dynamically 3000 psi

Indicators/operating means

LED green Power on LED red Output status LED red/green Short circuit/overload indication

Standa rd c on for mity

Stan dar ds EN 60947-5-2

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)

Mechanical specifications

Connection type Connector 7/8"-16 UN , 3-pin Degree of protection IP67 Material Housing: zinc

Note X = 1.50 in (38.1 mm)

Approvals and certificates

UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose

0.4

0.85

304

Dimensions

2 mm

≤ 7 V ≤ 3 A

8 ... 300 mA

L r

≤ 1.7 mA

Probe: aluminum

Ø48

Electrical Connection

Ø12.7

Ø25

LEDs

AC/DC

2 x

Ø6.5

26.2

"X"

7/8"-16

34.2

Release date: 2015-04-09 16:03 Date of issue: 2015-04-09 906590_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Inductive sensor NJ2-D-US-1.500-V93

Pinout

Wire colors

1 GN 2 BK 3 WH

(green) (black) (white)

NPT Type Mounting Holes: 1000 and 3000 psi NPT Types: Mounting hole screw thread shall be 1/4" - 20. Minimum thread engagement depth is 0.250" (6.35 mm) Hole spacing is 35 mm center to center.

Mounting Screws: Standard 1000 and 3000 psi models use two, self-locking 1/4"- 20 socket head cap screws (provided). Recommended tightening torque: 150 in lb (16.95 N-m).

Important: When using spacers, make certain to maintain the 0.250" (6.35 mm) minimum mounting screw thread engagement.

Sensor through-hole Mounting hole (x2)

Mounting

hole spacing

Cylinder End-Cap Overhead View

Release date: 2015-04-09 16:03 Date of issue: 2015-04-09 906590_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.