
Inductive sensor NJ15-M1K-A2
Technical Data
General specifications
Switching function complementary
Output type PNP
Rated operating distance sn15 mm
Installation non-flush
Output polarity DC
Model Number
NJ15-M1K-A2
Features
• 15 mm non-flush
•4-wire DC
Accessories
MH 04-3742A
Mounting aid for VariKont and -M1K-
Assured operating distance s
Reduction factor rAl 0.39
Reduction factor r
Reduction factor r
Output type 4-wire
Nominal ratings
Operating voltage UB10 ... 60 V DC
Switching frequency f 0 ... 200 Hz
Hysteresis H typ. 5 %
Reverse polarity protection yes
Short-circuit protection pulsing
Vol tag e d rop Ud≤ 2.5 V
S
Operating current I
No-load supply current I
Time delay before availability t
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Functional safety related parameters
MTTFd 932 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross section
Core cross-section up to 2.5 mm
Minimum core cross-section
Maximum core cross-section
Housing material PBT
Sensing face PBT
Degree of protection IP67
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
0.36
Cu
0.73
304
0 ... 12.15 mm
a
0 ... 200 mA
L
≤ 14.5 mA
0
≤ 50 ms
v
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm
without wire end ferrule 2.5 mm
EN 60947-5-2:2007
IEC 60947-5-2:2007
2
2
, with connector sleeves 1.5 mm
2
2
Dimensions
15
LEDs
30
30
41
20/22
4,3x5,3
M16 x 1,5
91
Release date: 2017-04-18 11:48 Date of issue: 2017-04-18 222494_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1

Inductive sensor NJ15-M1K-A2
Electrical Connection
1
4
2
3
L+
L-
Release date: 2017-04-18 11:48 Date of issue: 2017-04-18 222494_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2