Pepperl Fuchs NJ1.5-6.5-40-E0 Data Sheet
1
Inductive sensor NJ1,5-6,5-40-E0
Release date: 2015-02-18 13:55 Date of issue: 2015-02-18 205408_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
S
Model Number
NJ1,5-6,5-40-E0
Features
•1.5 mm flush
Accessories
BF 6,5
Mounting flange, 6.5 mm
Technical Data
General specifications
Switching element function NPN NO
Rated operating distance s
n
1.5 mm
Installation flush
Output polarity DC
Assured operating distance s
a
0 ... 1.215 mm
Reduction factor r
Al
0.2
Reduction factor r
Cu
0.1
Reduction factor r
304
0.5
Nominal ratings
Operating voltage U
B
10 ... 60 V
Switching frequency f 0 ... 2500 Hz
Hysteresis H 1 ... 15 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop U
d
≤ 2.5 V
Vol tag e d rop at I
L
Vol tag e dr op I
L
= 10
mA, switching element
on U
d
1 ... 2.2 V typ. 1.6 V
Vol tag e dr op I
L
= 20
mA, switching element
on U
d
0.9 ... 2.4 V typ. 1.7 V
Vol tag e dr op I
L
= 50
mA, switching element
on U
d
1.2 ... 2.4 V typ. 1.8 V
Vol tage dro p I
L
= 100
mA, switching ele-
ment on U
d
1.4 ... 2.6 V typ. 2 V
Operating current I
L
0 ... 100 mA
Lowest operating current I
m
0 mA
Off-state current I
r
≤ 0.1 mA
Off-state current T
U
=40 °C, switching ele-
ment off
≤ 100 µA
No-load supply current I
0
≤ 15 mA
Time delay before availability t
v
≤ 20 ms
Switching state indicator LED, yellow
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type cable PUR , 2 m
Core cross-section 0.14 mm
2
Housing material Stainless steel 1.4305 / AISI 303
Sensing face LCP
Degree of protection IP67
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
Dimensions
LED
40
ø 6.5
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Inductive sensor NJ1,5-6,5-40-E0
2
Release date: 2015-02-18 13:55 Date of issue: 2015-02-18 205408_eng.xml
Electrical Connection
BN
L+
L-
BK
BU
Loading...