Pepperl Fuchs NJ10-30GM50-E2-3G-3D-5M Data Sheet
Inductive sensor NJ10-30GM50-E2-3G-3D-5M
Technical Data
General specifications
Switching function Normally open (NO)
Output type PNP
Rated operating distance sn10 mm
Installation flush
Output polarity DC
Model Number
NJ10-30GM50-E2-3G-3D-5M
Features
•Comfort series
• 10 mm flush
• ATEX-approval for zone 2 and zone 22
Accessories
BF 30
Mounting flange, 30 mm
EXG-30
Quick mounting bracket with dead stop
Assured operating distance s
Actual operating distance sr9 ... 11 mm typ. 10 mm
Reduction factor r
Reduction factor rCu 0.32
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 60 V
Switching frequency f 0 ... 650 Hz
Hysteresis H 1 ... 15 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
S
Vol tag e d rop U
Vol tag e d rop at IL
Vol tag e dr op I
on U
d
Vol tag e dr op IL = 20 mA, switching element
on U
d
Vol tag e dr op I
on U
d
Vol tage dro p IL = 100 mA, switching element on U
Vol tage dro p I
ment on U
Operating current I
Off-state current I
No-load supply current I
Time delay before availability t
Switching state indicator LED, yellow
0.32
Al
0.72
304
0.43
Brass
= 10 mA, switching element
L
= 50 mA, switching element
L
d
= 200 mA, switching ele-
L
d
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type cable PVC 5 m
Core cross-section 0.75 mm
Housing material Stainless steel 1.4305 / AISI 303
Sensing face PBT
Degree of protection IP67
Cable
Bending radius
General information
Use in the hazardous area see instruction manuals
Category
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
0 ... 8.1 mm
a
≤ 2.8 V
d
0.9 ... 2.4 V typ. 1.7 V
0.9 ... 2.4 V typ. 1.7 V
0.9 ... 2.5 V typ. 1.7 V
1 ... 2.6 V typ. 1.8 V
1.2 ... 2.8 V typ. 2 V
0 ... 200 mA
L
0 ... 0.5 mA typ. 0.01 mA
r
≤ 9 mA
0
≤ 50 ms
v
> 10 x cable diameter
3G; 3D
EN 60947-5-2:2007
IEC 60947-5-2:2007
2
Release date: 2016-11-07 10:09 Date of issue: 2016-11-07 200108_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
Dimensions
M30x1,5
5
36,5
50
36
LED
1
Inductive sensor NJ10-30GM50-E2-3G-3D-5M
Electrical Connection
BN
BK
BU
L+
L-
Release date: 2016-11-07 10:09 Date of issue: 2016-11-07 200108_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...