Pepperl Fuchs NCN40-FP-W-T-P4 Data Sheet
Inductive sensor NCN40-FP-W-T-P4
Technical Data
General specifications
Switching element function AC NO/N C
Model Number
NCN40-FP-W-T-P4
Features
• Temperature range
-25 ... 100 °C (-13 ... 212 °F)
• 40 mm non-flush
Rated operating distance s
Installation non-flush
Output polarity AC
Assured operating distance sa0 ... 32.4 mm
Reduction factor r
Reduction factor rCu 0.3
Reduction factor r
Nominal ratings
Operating voltage UB20 ... 253 V
Switching frequency f 0 ... 20 Hz
Hysteresis H typ. 3 %
Short-circuit protection no
Vol tag e d rop U
Momentary current
(20 ms, 0.1 Hz)
Operating current I
S
Off-state current I
Time delay before availability t
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Ambient conditions
Ambient temperature -25 ... 100 °C (-13 ... 212 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
Core cross-section up to 2.5 mm
Minimum core cross-section
Maximum core cross-section
Housing material PBT/base of metal
Sensing face PBT
Housing base aluminum painted
Degree of protection IP68
Note
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
0.4
Al
0.85
304
40 mm
n
≤ 5 V typ. 4V
d
≤ 3000 mA
5 ... 500 mA
L
0.3 ... 1 mA typ. 0.7 mA
r
≤ 100 ms
v
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm
without wire end ferrule 2.5 mm
1)
In the temperature range below 0 °C, permissible operating voltage U
Safety fuse ≤ 2 A (quick-blow) according to IEC 60127-2 Sheet 1
Recommendation: after a short circuit, check that the device is
functioning correctly.
EN 60947-5-2:2007
IEC 60947-5-2:2007
2
80...253 V
b
2
, with connector sleeves 1.5 mm
2
2
Dimensions
40
11
80
65
1/2“ NPT
65
ø 9.5
LEDs
7
ø 5.3
LEDs
Release date: 2016-09-29 11:38 Date of issue: 2016-10-10 130540_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Inductive sensor NCN40-FP-W-T-P4
Electrical Connection
W, N O
W, N C
1
BN
3
I
4
2
1
3
I
4
2
L1
N
BU
BN
L1
BU
N
Release date: 2016-09-29 11:38 Date of issue: 2016-10-10 130540_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...