Pepperl Fuchs NCN3-F31-N4-V1 Data Sheet
Inductive sensor NCN3-F31-N4-V1
Technical Data
General specifications
Switching function 2 x normally closed (NC)
Output type NAMUR
Rated operating distance sn3 mm
Installation flush mountable
Assured operating distance sa0 ... 2.4 mm
0102
Model Number
NCN3-F31-N4-V1
Features
• Direct mounting on standard actuators
• Compact and stable housing
• Fixed setting
• EC-Type Examination Certificate
TÜV99 ATEX 1479X
• Usable up to SIL 2 acc. to IEC 61508
Accessories
BT65A
Activator for F31 series
BT65X
Activator for F31 series
BT115A
Activator for F31 series
BT115X
Activator for F31 series
BT65B
Activator for F31 series
BT115B
Activator for F31 series
Actual operating distance s
Actuating element Stainless steel 1.4305 / AISI 303
Reduction factor r
Reduction factor rCu 0.4
Reduction factor r
Reduction factor r
Reduction factor r
Output type 2-wire
Nominal ratings
Nominal voltage Uo8 V
Switching frequency f 0 ... 3 kHz
Hysteresis H typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection yes
Suitable for 2:1 technology yes , Reverse polarity protection diode not required
Current consumption
Measuring plate not detected
Measuring plate detected
Time delay before availability t
Switching state indicator LED, yellow
Functional safety related parameters
Safety Integrity Level (SIL) SIL 2
MTTF
1470 a
d
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 100 °C (-13 ... 212 °F)
Storage temperature -40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection (system side) 4-pin, M12 x 1 connector
Housing material PBT
Sensing face PBT
Degree of protection IP67
General information
Use in the hazardous area see instruction manuals
Compliance with standards and
directives
Standard conformity
NAMUR
Electromagnetic compatibility
Standards
Approvals and certificates
EAC conformity TR CU 012/2011
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
0.5
Al
1
304
1.3
St37
0.6
Brass
Dimensions
2.7 ... 3.3 mm typ.
r
8.5 mm x 8.5 mm x 0.5 mm
≥ 3 mA
≤ 1 mA
≤ 1.1 ms
v
Note:
Under the same product name but with a different part no., this
product has a predecessor with a restricted temperature range (up
to +70 °C).
The temperature range specified here (up to +100°C) only applies
to sensors with part no. 2239**.
EN 60947-5-6:2000
IEC 60947-5-6:1999
NE 21:2007
EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Release date: 2018-04-19 08:15 Date of issue: 2018-04-19 223957_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
36
7
9
5.4
30
LED
M12 x 1
33.5
5
II I
65
14
25
1
Inductive sensor NCN3-F31-N4-V1
Electrical Connection
N4-V1
S
I
II
1 / BN
3 / BU
2 / WH
4 / BK
I
I
II
L+
L-
L+
L-
Release date: 2018-04-19 08:15 Date of issue: 2018-04-19 223957_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...