Pepperl Fuchs NCN20-F35-A2-250-10M-V1 Data Sheet
Inductive sensor NCN20-F35-A2-250-10M-V1
Technical Data
General specifications
Switching element function PNP NO/NC
Model Number
NCN20-F35-A2-250-10M-V1
Features
•Comfort series
• 20 mm flush mountable
• Extended temperature range of sensor
component
0 ... 250 °C (0 ... 482 °F)
• 10 m cable between sensor and amplifier with metal case
• Suitable for drag chains
• Minimum bending radius of 30 cm for
movable laying
Rated operating distance s
Installation flush mountable
Output polarity DC
Assured operating distance sa0 ... 16.2 mm
Reduction factor r
Reduction factor rCu 0.5
Reduction factor r
Mounting angle Al
Amplifier housing Stainless steel
Nominal ratings
Operating voltage UB10 ... 30 V
Switching frequency f 0 ... 20 Hz
Hysteresis H 0.3 ... 5 typ. 2 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop Ud≤ 3 V
Operating current I
No-load supply current I
Time delay before availability t
Switching state indicator Multihole-LED, yellow
Functional safety related parameters
MTTFd 7515 a
Mission Time (T
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature 0 ... 250 °C (32 ... 482 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 4-pin
Cable version PFA cable, with armour of stainless steel
Core cross-section 3 x 0.34 , screened
Housing material PTFE / Al / 1.4305 / AISI 303
Sensing face PTFE
Degree of protection amplifier IP67
Cable length L = 10 m
Note - amplifier 0 °C ... 70 °C
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose, Class 2 Power Source
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
0.5
Al
0.6 ... 1
304
) 20 a
M
20 mm
n
0 ... 200 mA
L
≤ 25 mA
0
≤ 20 ms
v
sensor IP40
- r
dep. on thickness of measurement plate d:
1.4305
r
=1ford<1mm
1.4305
Additional accessory: Protective cover SH-F35 is available for use
in areas where there is moisture and as a means of mechanical
protection.
EN 60947-5-2:2007
IEC 60947-5-2:2007
Release date: 2015-03-11 07:50 Date of issue: 2015-03-11 187851_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Inductive sensor NCN20-F35-A2-250-10M-V1
Dimensions
40
40
30
46
56
2
ø 5.3
LED
Electrical Connection
4
30
M18 x 1
4
24
M12 x 1
1
4
2
3
L+
L-
L
70
75
85
6
Pinout
2
1
2
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
(brown)
(white)
(blue)
(black)
4
3
Release date: 2015-03-11 07:50 Date of issue: 2015-03-11 187851_eng.xml
Loading...