Pepperl Fuchs NCB5-18GM40-N010M Data Sheet

Inductive sensor NCB5-18GM40-N0-10M

Technical Data

General specifications

Switching function Normally closed (NC) Output type NAMUR Rated operating distance sn5 mm Installation flush Assured operating distance sa0 ... 4.05 mm

0102

Model Number

NCB5-18GM40-N0-10M

Features

• Comfort series

•5 mm flush

Accessories

EXG-18

Quick mounting bracket with dead stop

BF 18

Mounting flange, 18 mm

Actual operating distance s Reduction factor rAl 0.35 Reduction factor r Reduction factor r Output type 2-wire

Nominal ratings

Nominal voltage Uo8 V Switching frequency f 0 ... 400 Hz Hysteresis H 1 ... 15 typ. 5 % Reverse polarity protection reverse polarity protected Short-circuit protection yes Current consumption

Measuring plate not detected Measuring plate detected

Switching state indicator all direction LED, yellow

Functional safety related parameters

MTTFd 2040 a Mission Time (TM) 20 a Diagnostic Coverage (DC) 0 %

Ambient conditions

Ambient temperature -25 ... 100 °C (-13 ... 212 °F) Storage temperature -40 ... 100 °C (-40 ... 212 °F)

Mechanical specifications

Connection type cable PVC , 10 m Core cross-section 0.75 mm Housing material Stainless steel 1.4305 / AISI 303 Sensing face PBT Degree of protection IP67 Cable

Bending radius

General information

Use in the hazardous area see instruction manuals

Category

Compliance with standards and directives

Standard conformity

NAMUR

Standards

Approvals and certificates

EAC conformity TR CU 012/2011 UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V

0.3

0.74

304

Dimensions

4.5 ... 5.5 mm typ. 5 mm

≥ 3 mA ≤ 1 mA

> 10 x cable diameter

1G; 2G; 3G; 1D; 3D

EN 60947-5-6:2000 IEC 60947-5-6:1999 EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012

Release date: 2018-04-19 08:13 Date of issue: 2018-04-19 181109_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

M18x1

LED

Inductive sensor NCB5-18GM40-N0-10M

Electrical Connection

Equipment protection level Ga

CE marking 0102

ATEX marking ¬ II 1G Ex ia IIC T6…T1 Ga The Ex-related marking can also be printed on the enclosed label.

Standards EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection "Intrinsic safety"

Appropriate type NCB5-18GM...-N0...

Effective internal inductivity C

Effective internal inductance L

Ambient temperature Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the

Equipment protection level Gb

CE marking 0102

ATEX marking ¬ II 1G Ex ia IIC T6…T1 Ga

Standards EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection "Intrinsic safety"

Appropriate type NCB5-18GM...-N0...

Effective internal inductivity C

Effective internal inductance L

Maximum permissible ambient temperature T

Equipment protection level Gc (ic)

Certificate PF 13 CERT 2895 X

CE marking

L+

L-

Use is restricted to the following stated conditions

≤ 95 nF ; a cable length of 10 m is considered.

≤ 100 µH ; a cable length of 10 m is considered.

temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.

Note:

Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already

been applied to the temperature table for category 1.

The Ex-significant identification is on the enclosed adhesive label

Use is restricted to the following stated conditions

≤ 95 nF ; a cable length of 10 m is considered.

≤ 100 µH ; a cable length of 10 m is considered.

Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the

amb

temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.

ATEX marking ¬ II 3G Ex ic IIC T6…T1 Gc

Standards EN 60079-0:2012+A11:2013 EN 60079-11:2012 Ignition protection category "ic" Use is restricted to the following

Effective internal inductivity C

Effective internal inductance L

Special conditions

for Pi=34 mW, Ii=25 mA, T6

for Pi=34 mW, Ii=25 mA, T5

for Pi=34 mW, Ii=25 mA, T4-T1

for Pi=64 mW, Ii=25 mA, T6

for Pi=64 mW, Ii=25 mA, T5

for Pi=64 mW, Ii=25 mA, T4-T1

for Pi=169 mW, Ii=52 mA, T6

for Pi=169 mW, Ii=52 mA, T5

for Pi=169 mW, Ii=52 mA, T4-T1

for Pi=242 mW, Ii=76 mA, T6

for Pi=242 mW, Ii=76 mA, T5

for Pi=242 mW, Ii=76 mA, T4-T1

The Ex-significant identification is on the enclosed adhesive label

stated conditions

≤ 95 nF ; a cable length of 10 m is considered.

≤ 100 µH ; A cable length of 10 m is considered.

55 °C (131 °F)

52 °C (125.6 °F)

44 °C (111.2 °F)

Release date: 2018-04-19 08:13 Date of issue: 2018-04-19 181109_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

+ 1 hidden pages