Pepperl Fuchs NCB50-FP-Z2-P1 Data Sheet
Inductive sensor NCB50-FP-Z2-P1
Technical Data
General specifications
Switching element function DC NO/NC
Model Number
NCB50-FP-Z2-P1
Features
• 50 mm flush
•2-wire DC
Rated operating distance s
Installation flush
Output polarity DC
Assured operating distance sa0 ... 40.5 mm
Actual operating distance s
Reduction factor rAl 0.4
Reduction factor r
Reduction factor r
Nominal ratings
Operating voltage UB10 ... 60 V DC
Switching frequency f 0 ... 80 Hz
Hysteresis H 0 ... 20 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Vol tag e d rop U
Vol tag e d rop at IL
S
Vol tag e dr op I
on U
d
Operating current I
Lowest operating current I
Off-state current I
Time delay before availability t
Switching state indicator LED, yellow
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
Core cross-section up to 2.5 mm
Minimum core cross-section
Maximum core cross-section
Housing material PBT
Sensing face PBT
Housing base PBT
Degree of protection IP68
Protection class II
Compliance with standards and directives
Stan dard conf ormit y
Sta ndar ds
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)
0.35
Cu
0.8
304
= 20 mA, switching element
L
50 mm
n
45 ... 55 mm typ.
r
≤ 3.8 V
d
2.7 ... 4.9 V
2 ... 200 mA
L
2 mA
m
≤ 0.6 mA
r
≤ 300 ms
v
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
without wire end ferrule 0.5 mm2 , with connector sleeves 0.34 mm
without wire end ferrule 2.5 mm
EN 60947-5-2:2007
IEC 60947-5-2:2007
2
2
, with connector sleeves 1.5 mm
2
2
Dimensions
15
40
9
84
80
65
M20 x 1.5
65
ø 9.5
7
ø 5.3
LEDs
Release date: 2016-09-29 11:38 Date of issue: 2016-10-10 182526_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
1
Inductive sensor NCB50-FP-Z2-P1
Electrical Connection
3
1
4
2
L+
L-
Release date: 2016-09-29 11:38 Date of issue: 2016-10-10 182526_eng.xml
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
2
Loading...