Pepperl Fuchs NCB40-FP-N0-P1-V1 Data Sheet

Inductive sensor NCB40-FP-N0-P1-V1

Technical Data

General specifications

Switching function Normally closed (NC) Output type NAMUR Rated operating distance sn40 mm Installation flush Assured operating distance sa0 ... 32 mm

0102

Model Number

NCB40-FP-N0-P1-V1

Features

• 40 mm flush

Accessories

V1-G

Female connector, M12, 4-pin, field attachable

V1-W

Female connector, M12, 4-pin, field attachable

V1-G-N-2M-PUR

Female cordset, M12, 2-pin, NAMUR, PUR cable

V1-W-N-2M-PUR

Female cordset, M12, 2-pin, NAMUR, PUR cable

Actual operating distance s Reduction factor rAl 0.35 Reduction factor r Reduction factor r Output type 2-wire

Nominal ratings

Installation conditions

F Nominal voltage U Switching frequency f 0 ... 80 Hz Hysteresis H 0 ... 5 typ. 3 % Reverse polarity protection reverse polarity protected Short-circuit protection yes Current consumption

Measuring plate not detected

Measuring plate detected Time delay before availability t Switching state indicator LED, yellow

Functional safety related parameters

MTTFd 2368 a Mission Time (T Diagnostic Coverage (DC) 0 %

Ambient conditions

Ambient temperature -25 ... 100 °C (-13 ... 212 °F) Storage temperature -40 ... 100 °C (-40 ... 212 °F)

Mechanical specifications

Connection type Connector plug M12 x 1 , 4-pin Housing material PBT Sensing face PBT Housing base PBT Degree of protection IP67

General information

Use in the hazardous area see instruction manuals

Category

Compliance with standards and directives

Standard conformity

NAMUR

Electromagnetic compatibility

Standards

Approvals and certificates

EAC conformity TR CU 012/2011 FM approval

Control drawing UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V

0.35

0.8

304

) 20 a

36 ... 44 mm typ. 40 mm

100 mm

8.2 V (Ri approx. 1 kΩ)

≥ 3 mA ≤ 1 mA ≤ 20 ms

1G; 2G; 1D

EN 60947-5-6:2000 IEC 60947-5-6:1999 NE 21:2007 EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012

116-0165

Release date: 2018-04-19 08:12 Date of issue: 2018-04-19 180491_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Inductive sensor NCB40-FP-N0-P1-V1

Dimensions

916

Electrical Connection

ø 9.5

M12 x 1

ø 5.3

LEDs

Wire colors in accordance with EN 60947-5-6

1 BN 2 BU

Equipment protection level Ga

CE marking 0102

ATEX marking ¬ II 1G Ex ia IIC T6…T1 Ga

Standards EN 60079-0:2012+A11:2013, EN 60079-11:2012

Appropriate type NCB40-FP-N0..

Effective internal inductivity C

Effective internal inductance L

Highest permissible ambient temperature Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the

Special conditions

L+

L-

(brown) (blue)

The Ex-related marking can also be printed on the enclosed label.

Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions

≤ 220 nF ; a cable length of 10 m is considered.

≤ 360 µH ; a cable length of 10 m is considered.

temperature class, and the effective internal reactance values can be found on the EU-type examination certificate.

Note:

Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already

been applied to the temperature table for category 1.

Release date: 2018-04-19 08:12 Date of issue: 2018-04-19 180491_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

+ 1 hidden pages