Pepperl Fuchs NCB2-V3-N0-2M Data Sheet

Inductive sensor NCB2-V3-N0-2M

Technical Data

General specifications

Switching function Normally closed (NC)
Output type NAMUR
Rated operating distance sn2 mm
Installation flush
Assured operating distance sa0 ... 1.62 mm

0102

Model Number

NCB2-V3-N0-2M

Features

•2 mm flush

Reduction factor r
Reduction factor rCu 0.2
Reduction factor r
Output type 2-wire

Nominal ratings

Nominal voltage Uo8.2 V (Ri approx. 1 kΩ)
Switching frequency f 0 ... 2000 Hz
Hysteresis H typ. 3 %
Current consumption

Measuring plate not detected
Measuring plate detected

Switching state indicator LED, yellow

Ambient conditions

Ambient temperature -25 ... 100 °C (-13 ... 212 °F)

Mechanical specifications

Connection type cable PVC , 2 m
Core cross-section 0.14 mm
Housing material PBT
Sensing face PBT
Degree of protection IP67
Cable

Bending radius

General information

Use in the hazardous area see instruction manuals

Category

Compliance with standards and
directives

Standard conformity

NAMUR

Electromagnetic compatibility
Standards

Approvals and certificates

EAC conformity TR CU 012/2011
FM approval

Control drawing
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V

Dimensions

0.3

Al

0.7

304

≥ 3 mA
≤ 1 mA

2

> 10 x cable diameter

1G; 2G; 1D

EN 60947-5-6:2000
IEC 60947-5-6:1999
NE 21:2007
EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012

116-0165F

Electrical Connection

5.5

1010.3

ø 3

16

22.2

27.8

BN

BU

L+

L-

LED

Release date: 2018-04-19 08:12 Date of issue: 2018-04-19 243198_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

1

Inductive sensor NCB2-V3-N0-2M

Equipment protection level Ga

CE marking 0102

ATEX marking ¬ II 1G Ex ia IIC T6…T1 Ga

Standards EN 60079-0:2012+A11:2013 EN 60079-11:2012

Appropriate type NCB2-V3-N0...

Effective internal inductivity C

Effective internal inductance L

Ambient temperature Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the

Equipment protection level Gb

CE marking 0102

ATEX marking ¬ II 1G Ex ia IIC T6…T1 Ga

Standards EN 60079-0:2012+A11:2013, EN 60079-11:2012

Appropriate type NCB2-V3-N0...

Effective internal inductivity C

Effective internal inductance L

Maximum permissible ambient temperature T

Equipment protection level Da

CE marking 0102

ATEX marking ¬ II 1D Ex ia IIIC T135°C Da

Standards EN 60079-0:2012+A11:2013 EN 60079-11:2012

Appropriate type NCB2-V3-N0...

Effective internal inductivity C

Effective internal inductance L

i

i

i

i

i

i

The Ex-related marking can also be printed on the enclosed label.

Ignition protection "Intrinsic safety"
Use is restricted to the following stated conditions

≤ 100 nF

≤ 100 µH

temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.

Note:

Use the temperature table for category 1 !!! The 20 % reduction in accordance with EN 1127-1 has already

been applied to the temperature table for category 1.

The Ex-related marking can also be printed on the enclosed label.

Ignition protection "Intrinsic safety"
Use is restricted to the following stated conditions

≤ 100 nF

≤ 100 µH

Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the

amb

temperature class, and the effective internal reactance values can be found on the EC-type examination certificate.

The Ex-related marking can also be printed on the enclosed label.

Ignition protection "Intrinsic safety" Use is restricted to the following stated conditions

≤ 100 nF

≤ 100 µH

Release date: 2018-04-19 08:12 Date of issue: 2018-04-19 243198_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

2