
Inductive sensor NBN4-12GM60-E2-T-V1
Dimensions
M12 x 1
4
6.5
Model Number
NBN4-12GM60-E2-T-V1
Features
• 4 mm not embeddable
• Extended temperature range
Connection
1
4
3
L+
L-
Pinout
1
2
4
3
Wire colors in accordance with EN 60947-5-2
1 BN
2 WH
3 BU
4 BK
(brown)
(white)
(blue)
(black)
Accessories
BF 12
Mounting flange, 12 mm
V1-W
4-pin, M12 female field-attachable connector
V1-G
4-pin, M12 female field-attachable connector
17
54
65
LED
Technical Data
General specifications
Switching element function PNP NO
Rated operating distance s
Installation not embeddable
Output polarity DC
Assured operating distance sa0 ... 3.24 mm
Actuating element structural steel, e. g. 1.0037, SR235JR (formerly St37-2)
Reduction factor rAl 0.5
Reduction factor r
Reduction factor r
Reduction factor r
Nominal ratings
Installation conditions
A
B
C
F
Operating voltage UB10 ... 30 V
Switching frequency f 0 ... 800 Hz
Hysteresis H 0.03 ... 0.88 mm
Reverse polarity protected yes
Short-circuit protection yes
Overload resistance yes
Wire breakage protection yes
Inductive overvoltage protection yes
Surge suppression yes
Ripple 10 %
Voltage drop Ud≤ 2.5 V
Repeat accuracy 0.2 mm
Operating current I
Off-state current I
No-load supply current I
Indication of the switching state all direction LED, yellow
Functional safety related parameters
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 100 °C (-13 ... 212 °F)
Storage temperature -40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection type connector M12 x 1, 4-pin
Housing material brass, nickel-plated
Sensing face PBT
Protection degree IP67
Mass 20 g
Compliance with standards and directives
Standard conformity
Standards
Approvals and certificates
CCC approval Products with a maximum operating voltage of ≤36 V do not bear a
0.4
Cu
0.8
304
0.5
Brass
4 mm
n
12 mm x 12 mm x 1 mm
8 mm
9 mm
8 mm
27 mm
0 ... 200 mA
L
≤ 0.01 mA
r
≤ 7 mA
0
EN 60947-5-2:2007
IEC 60947-5-2:2007
CCC marking because they do not require approval.
Release date: 2012-03-22 08:48 Date of issue: 2012-03-22 236502_eng.xml
Subject to modifications without notice
Pepperl+Fuchs Group
Copyright Pepperl+Fuchs
1