Pepperl Fuchs NBN12-18GM50-E0 Data Sheet

Inductive sensor

Model Number

NBN12-18GM50-E0

Features

•Basic series

•Increased operating distance

•12 mm not embeddable

Connection

BN L+

BU L-

Accessories

BF 18-F

Mounting flange with dead stop, 18 mm

<![if ! IE]>

<![endif]>Release date: 2011-07-14 12:08 Date of issue: 2011-07-14 087777_eng.xml

Subject to modifications without notice

NBN12-18GM50-E0

Dimensions

M18x1

<![if ! IE]>

<![endif]>10

Technical Data

General specifications
Switching element function		NPN	NO
Rated operating distance	sn	12 mm
Installation		not embeddable
Output polarity		DC
Assured operating distance	sa	0 ... 9.72 mm
Reduction factor rAl		0.5
Reduction factor rCu		0.4
Reduction factor r303		0.7
Nominal ratings
Operating voltage	UB	10 ... 30 V
Switching frequency	f	0 ... 200 Hz
Hysteresis	H	typ. 5%
Reverse polarity protected		reverse polarity protected
Short-circuit protection		pulsing
Voltage drop	Ud	≤ 3 V
Operating current	IL	0 ... 200 mA
Off-state current	Ir	0 ... 0.5 mA typ. 0.1 A at 25 °C
No-load supply current	I0	≤ 10 mA
Indication of the switching state		all direction LED, yellow
Functional safety related parameters

MTTFd		1500 a
Mission Time (TM)		20 a
Diagnostic Coverage (DC)		0 %
Ambient conditions

Ambient temperature		-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type		cable PVC , 2 m
Core cross-section		0.34 mm2
Housing material		brass, nickel-plated
Sensing face		PBT
Protection degree		IP67
Compliance with standards and directives

Standard conformity
Standards		EN 60947-5-2:2007
		IEC 60947-5-2:2007

Approvals and certificates

UL approval		cULus Listed, General Purpose
CSA approval		cCSAus Listed, General Purpose

CCC approval		Products with a maximum operating voltage of ≤36 V do not bear a
		CCC marking because they do not require approval.