Pepperl Fuchs NBB8-18GM50-E1-V1-M Data Sheet

Inductive sensor NBB8-18GM50-E1-V1-M

Technical Data

General specifications

Switching function Normally closed (NC) Output type NPN Rated operating distance sn8 mm Installation flush Output polarity DC

Model Number

NBB8-18GM50-E1-V1-M

Features

•8 mm flush

• Extended temperature range

-40 ... +85 °C

• E1-Type approval

• Increased noise immunity 100 V/m

• With increased sealing, protection class IP68 / IP69K

• Highly shock and vibration resistant

Accessories

EXG-18

Quick mounting bracket with dead stop

BF 18

Mounting flange, 18 mm

V1-W

Female connector, M12, 4-pin, field attachable

V1-G-2M-PUR

Female cordset, M12, 4-pin, PUR cable

V1-G

Female connector, M12, 4-pin, field attachable

V1-W-2M-PUR

Female cordset, M12, 4-pin, PUR cable

Assured operating distance s Reduction factor rAl 0.4 Reduction factor r Reduction factor r Reduction factor r Output type 3-wire

Nominal ratings

Operating voltage UB5 ... 60 V Switching frequency f 0 ... 1500 Hz Hysteresis H typ. 5 % Reverse polarity protection reverse polarity protected

E 1

Short-circuit protection pulsing Inductive overvoltage protection yes Surge suppression yes Vol tag e d rop U Rated insulation voltage U Operating current I Off-state current I No-load supply current I Time delay before availability t Switching state indicator Multihole-LED, yellow

Functional safety related parameters

MTTFd 1085.5 a Mission Time (TM) 20 a Diagnostic Coverage (DC) 0 %

Ambient conditions

Ambient temperature -40 ... 85 °C (-40 ... 185 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type Connector M12 x 1 , 3-pin Housing material brass, nickel-plated Sensing face PBT Degree of protection IP68 / IP69K Mass 46 g

Compliance with standards and directives

Stan dard conf ormit y

Sta ndar ds

Approvals and certificates

EAC conformity TR CU 020/2011 UL approval cULus Listed, General Purpose, Class 2 Power Source CSA approval cCSAus Listed, General Purpose, Class 2 Power Source CCC approval Certified by China Compulsory Certification (CCC) E1 Type approval 10R-04

0.3

0.7

304

0.45

Brass

Dimensions

0 ... 6.48 mm

≤ 2 V

60 V

BIS

0 ... 200 mA

0 ... 0.5 mA typ. 0.1 µA at 25 °C

≤ 7 mA

≤ 220 ms

EN 60947-5-2:2007 IEC 60947-5-2:2007

M18 x 1

Release date: 2017-02-15 14:54 Date of issue: 2017-02-15 240169_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.

Electrical Connection

LED

M12 x 1

L+

L-

Inductive sensor NBB8-18GM50-E1-V1-M

Pinout

Installation Hint

Wire colors in accordance with EN 60947-5-2

1 BN 2 WH 3 BU 4 BK

Interference immunity in accordance with DIN ISO 11452-2: 100 V/m Frequency band 20 MHz up to 2 GHz

Mains-borne interference in accordance with ISO 7637-2: Pulse 1 2a 2b 3 a 3b 4 5 Severity level III III III III III III III Failure criterion C A C A A A B

EN 61000-4-2: CD: 8 kV / AD: 15 kV Severity level IV IV EN 61000-4-3: 30 V/m (80...2500 MHz) Severity level IV EN 61000-4-4: 2 kV Severity level III EN 61000-4-6: 10 V (0.01...80 MHz) Severity level III EN 55011: Class A

(brown) (white) (blue) (black)

Release date: 2017-02-15 14:54 Date of issue: 2017-02-15 240169_eng.xml

Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.