Pepperl Fuchs NBB2-F29-E2-5M Data Sheet

Inductive sensor NBB2-F29-E2-5M

Technical Data

General specifications

Switching function Normally open (NO) Output type PNP Rated operating distance sn2 mm Installation flush Output polarity DC

Model Number

NBB2-F29-E2-5M

Features

•2 mm flush

•3-wire DC

Assured operating distance s Reduction factor rAl 0.4 Reduction factor r Reduction factor r Output type DC, 3-wire

Nominal ratings

Operating voltage UB4.75 ... 30 V DC Switching frequency f 0 ... 1000 Hz Hysteresis H typ. 5 % Reverse polarity protection reverse polarity protected Short-circuit protection pulsing Voltage drop Ud≤ 2 V Operating current I Off-state current I No-load supply current I Switching state indicator LED, yellow

Functional safety related parameters

MTTFd 1680 a Mission Time (T Diagnostic Coverage (DC) 0 %

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F) Storage temperature -40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type cable PVC , 5 m Core cross-section 0.14 mm Housing material Ryton R4 Sensing face Ryton R4 Degree of protection IP67 Cable

Cable diameter Bending radius

Compliance with standards and directives

Standard conformity

Standards

Approvals and certificates

UL approval cULus Listed, General Purpose CCC approval CCC approval / marking not required for products rated ≤36 V

0.3

0.7

304

) 20 a

Dimensions

0 ... 1.62 mm

0 ... 100 mA

0 ... 0.5 mA typ. 0.1 µA at 25 °C

≤ 15 mA

3.5 mm ± 0.2 mm > 10 x cable diameter

EN 60947-5-2:2007 EN 60947-5-2/A1:2012 IEC 60947-5-2:2007 IEC 60947-5-2 AMD 1:2012

LED

Electrical Connection

5 21.65

L+

L-

10.2

7.2

2.4

Release date: 2019-08-05 13:10 Date of issue: 2019-08-05 279282_eng.xml

Refer to "General Notes Relating to Pepperl+Fuchs Product Information".

Pepperl+Fuchs Group