Pepperl Fuchs NBB2-8GM50-E25M Data Sheet

Inductive sensor NBB2-8GM50-E2-5M

Dimensions

M8x1

Model Number

NBB2-8GM50-E2-5M

Features

• Increased operating distance

• Protection degree IP67

Connection

L+

L-

Accessories

BF 8

Mounting flange, 8 mm

EXG-08

Quick mounting bracket with dead stop

LED

Technical Data

General specifications

Switching element function PNP NO Rated operating distance s Installation embeddable Output polarity DC Assured operating distance sa0 ... 1.62 mm Reduction factor r Reduction factor rCu 0.35 Reduction factor r

Nominal ratings

Operating voltage UB10 ... 30 V Switching frequency f 0 ... 1500 Hz Hysteresis H typ. 5 % Reverse polarity protected reverse polarity protected Short-circuit protection pulsing Voltage drop Ud≤ 3 V Operating current I Off-state current I No-load supply current I Indication of the switching state LED, yellow

Functional safety related parameters

MTTFd 2730 a Mission Time (T Diagnostic Coverage (DC) 0 %

Ambient conditions

Ambient temperature -25 ... 70 °C (-13 ... 158 °F)

Mechanical specifications

Connection type cable PVC , 5 m Core cross-section 0.14 mm Housing material brass, nickel-plated Sensing face LCP Protection degree IP67

Compliance with standards and directives

Standard conformity

Standards

Approvals and certificates

UL approval cULus Listed, General Purpose CSA approval cCSAus Listed, General Purpose CCC approval Products with a maximum operating voltage of ≤36 V do not bear a

0.45

0.75

V2A

) 20 a

2 mm

0 ... 100 mA

0 ... 0.5 mA typ. 0.1 µA

≤ 15 mA

EN 60947-5-2:2007 IEC 60947-5-2:2007

CCC marking because they do not require approval.

Release date: 2010-11-16 11:10 Date of issue: 2010-11-19 089640_ENG.xml

Subject to modifications without notice